Page Comparison

Image Removed

Image Added

1️⃣ System Reset Button: iZone system reset button is located on the side or bottom of the screen depending on screen orientation

2️⃣ AC System name: The AC system name is generated automatically by the system. Additional systems displayed on the same screen will have sequential numbers eg. 1,2,3....Tap on the icon to access this AC system

3️⃣ Scenes: Tap here to access the the scenes set up

4️⃣ Screen Beep: Press here to turn the screen beep on / off

5️⃣ Home button: Press the Home button 1-2 times to return to this Home screen

6️⃣ Home Screen: Typical Classic style home screen

7️⃣ Screen Settings: Tap here to change the screen settings including: Background Colour, Brightness, Contrast, Saturation, Graphic Style, Screen Orientation, Child Lock, Hide other services

8️⃣ Time & Date: Tap here to change the date and time

9️⃣ Wi-Fi: If a Wi-Fi bridge is paired it will display a Grey symbol as shown Screen display: When the CEPC goes to sleep it will display either the current room temperature or the current time. Go to the the Config menu > Option > Temp / Time here you can change the following display when the screen goes to sleep> Select from the following > Display temperature (as shown above) or display time. To wake the screen up just move the dial and it will go to the last screen it was on before going to sleep

Screen tip: Low power electronic paper or ink screens like the ones used on the CEPC are prone to shadowing when a fresh screen does not wipe the screen clean before re-populating new information. The screen undertake a full wipe when it is woken up

Dial / Selector: Rotate the dial to move the selection to the the next item (Anti-clockwise = Left / Up and Clockwise = Right / Down)

Image Removed

Image Added

1️⃣ Return to main menu2️⃣ ON/OFF Buttonicon: The AC unit can be turned on an or off by pressing the On/Off buttonusing the dial to select the function then press the dial to change. When on the button will be green and the text below the button icon will read System is OnAC on. When off the button will turn red and the text below the button icon will read System is AC Off

3️⃣ AC Unit Control: Press the AC Unit button 2️⃣ Mode: This icon is displaying the current mode. Select this item to access the AC Unit Control screen. In the AC Unit Control screen you can change modes, fan speeds, set points etc.4️⃣

3️⃣ Fan Speed: This icon is displaying the current fan speed. Select this item to access the AC Unit Control screen. In the AC Unit Control screen you can change modes, fan speeds, set points etc

4️⃣ Zone Summary: Press the Select Zones button to access the Zones Summary. For an explanation of the different Zone configurations follow this link. When the Zones button is pressed The Zone summary will open

5️⃣ Zone Airflow AdjustmentFavourites & Schedules: Press the Zone Airflow Favourites button to access the Zone Airflows Favourites Summary. When the Zones button is pressed The Airflow Favourites summary will open

6️⃣ Favourites: Press the Favourites button to access the Favourites Summary. When the Zones button is pressed The Favourites summary will open

7️⃣ Schedules: Press the Schedules button to access the Schedules Summary. When the Zones button is pressed The Schedules summary will open

8️⃣ Sleep Timer: Press the Sleep timer button Sleep timer: Select the Sleep timer item to toggle different times from half and an hour to 12 hours. When set the AC system will run for the selected period of time and then turn off automatically. If you require a more sophisticated schedule go to Schedules

9️⃣ System Configuration: Press the Config button to access the system configuration settings. For details of how to access the configuration menu click on this link

1️⃣ 0️⃣ iSave: If fitted the iSave 7️⃣ Pair sensors: This icon is used to pair wireless sensors to the iZone AC system

8️⃣ Configuration menu: Select the Config icon to access the system configuration menu

9️⃣ iSave: If fitted the iSave system can be manually turned on and off by pressing selecting the iSave button. When the iSave system is turned on the AC unit will be changed automatically to Vent mode, the outside air dampers will open fully and the return air dampers will close fully. The zones will control as per normal. When the iSave system is turned off the AC unit will be changed automatically back to it's previous mode, the outside air dampers will close fully and the return air dampers will open fully

1️⃣ 1️⃣ Sensor Pair Button: You can use this pair button to pair devices to the iZone Aircon system like zone sensors, bridge etc

1️⃣ 2️⃣ Wi-Fi connection: The Wi-Fi connection symbol will only appear if a bridge. When first paired to the system the symbol will be grey. Once it is connected to a Wi-fi modem / router the symbol will change to green

1️⃣ 3️⃣ Messages and alerts: Messages and alerts will display in a box here. For maintenance messages like filter clean due, this message can be cleared by pressing the message several times

Image Removed

0️⃣ Dial / Selector: Rotate the dial to move the selection to the the next item (Anti-clockwise = Left / Up and Clockwise = Right / Down)

1️⃣ AC Unit Control Screen: This is the AC Unit Control Screen which is accessed via the AC System Summary

2️⃣ Current Mode: Current AC Mode. Press the button to change

3️⃣ Current AC Unit Status: The current AC Unit Status is described here. If a fault with the AC unit occurs it should be displayed here

4️⃣ Current Controlling Set point The current Controlling Set point: The current controlling set point is shown here. This view will differ depending on the configuration of the AC Unit Controlling sensor. In this graphic the AC unit is being controlled from "Zones" and the zone that is currently furthest from set point is "Research2Lounge" which is currently the zone that is furthest from set point

5️⃣ Controlling zone: The name of the zone currently controlling the AC unit

6️⃣ Current Fan speed: The current fan speed is displayed here. Press the fan button to change

PanelActual temp: Actual temperature in the controlling zone

In duct temp: Current in-duct temperature

Current mode: Current AC Mode. Select the icon to change

Current Fan speed: The current fan speed is displayed here. Select the fan icon to change

Image Added

1️⃣ Zone Names: The Zone names are listed here2️⃣ Zone Summary Screen: This is the Zone Summary Screen

3️⃣ Home Button: Press the home or back button to return to the AC system summary screen

4️⃣ Zone Status: The zone status is detailed here as an icon and matching text. Press the text button to go to the zone detailsUsing the dial, move the cursor to Zones. Press the dial to select

Image Removed

1️⃣ Office Zone Details Screen: This is the Zone Details Screen for the "Office"

2️⃣ Zone Set Point: This is the Zone Set Point (If fitted with temperatures sensors)

3️⃣ Open Zone: To open the zone, touch the Open button

4️⃣ Current zone setting: The back ground of the current zone setting will be displayed in dark blue. To set a zone to climate (Temperature) control, touch the Climate Control button

5️⃣ Actual Zone Temperature: The current temperature in the zone will be displayed hereImage Added

2️⃣ Back button: To go back to the home page move the cursor up to the the back button and press the dial to select

3️⃣ Zone name: Rotate the dial to move the cursor to the Zone you want to adjust. Press the dial to enter the zone details. To change the zone name click here

4️⃣ Climate control: Rotate the dial until the cursor underlines the thermometer> Press select> Rotate the dial to change between different options (Climate / OPEN / CLOSE) > Press to select the required function

6️⃣ Home Button: Press the home or back button to return to the Zone Summary Screen

7️⃣ Increase SP: To increase the Zone set point press the up arrow

8️⃣ Decrease SP: To decrease the Zone set point press the down arrow

9️⃣ Close Zone: To close the zone, touch the Close button

1️⃣ 0️⃣ \System In Duct Temp: The current system supply air temperature will be displayed here

5️⃣ Set point temperature: Rotate the dial until the cursor underlines the set point temperature> Press select> Rotate the dial to change the set point temperatures (Clockwise to increase the SP temperature, anticlockwise to decrease the SP temperature) > Press the dial to save the required SP temperature

6️⃣ Max Airflow: Rotate the dial until the cursor underlines the Max airflow percentage> Press select> Rotate the dial to change the Max Airflow % (Clockwise to increase the Max %, anticlockwise to decrease the Max %) > Press the dial to save the required Max airflow for the selected zone

7️⃣ Zone is Closed: Rotate the dial until the cursor underlines the Damper icon or the word Close > Press select> Rotate the dial to change between different options (Climate / OPEN / CLOSE) > Press to select the required function

AIRFLOW SUMMARY

Image Removed

1️⃣ Airflow Summary Screen: This is the Airflow summary screen

2️⃣ Zone Name: Zones are listed here

3️⃣ Current Min / Max Airflow %: Current airflow settings are detailed here. Press the Min/Max button to access the Airflow Details screen and edit the settings

8️⃣ Zone is open: Rotate the dial until the cursor underlines the Damper icon or the word Close > Press select> Rotate the dial to change between different options (Climate / OPEN / CLOSE) > Press to select the required function

AIRFLOW DETAILS

Image Removed

1️⃣ Zone being edited: The Zone Name will appear at the top of the Airflow Details Screen

2️⃣ Press the arrows to change the Max Airflow%: Use the up and down arrows to edit the Maximum Airflow% to this zone. If these arrows are not visible the Airflow adjustment may have been locked

Image Added

1️⃣ Zone Summary: Using the dial, move the cursor to Zones. Press the dial to select

Image Added

2️⃣ Back button: To go back to the home page move the cursor up to the the back button and press the dial to select

3️⃣ Max Airflow: Rotate the dial until the cursor underlines the Max airflow percentage> Press select> Rotate the dial to change the Max Airflow % (Clockwise to increase the Max %, anticlockwise to decrease the Max %) > Press the dial to save the required Max airflow for the selected zone

A favourite is a short cut which allows the user to press a single button to simultaneously make multiple changes to the zones status, set points, mode, fan speed

Once a favourite has been created it can then be scheduled to start and stop at specific times during a 7 day week

To configure a schedule it is necessary to first create a Favourite with the Mode, Fan Speed and zone settings that you want to run when the schedule is active

Once the favourite has been created and tested it can then be scheduled to start and / or stop at the required time

• Schedule A will start at 0:800 and will stop before its scheduled time at 08:45 as it has been overridden by Schedule B

• Schedule B will start at 0:845 and will stop before its scheduled time at 09:15 as it has been overridden by Schedule C

• Schedule C start and stop at its required schedule times of 09:15 - 10:40

Image Added

1️⃣ Favourites Summary: This is the Favourites Summary accessed from the AC System Summary

2️⃣ Press to edit: To edit a favourite press this "Assign Favourites" button then press the favourite you want to edit. This will take you to the Favourite's Detail screen

3️⃣ Favourite Name: The name of the favourite is displayed here it is useful to name it something that indicates what the favourite does. To edit the name follow the steps in 2 above

4️⃣ Press to run: To run a favourite just press the favourite button you want to run Home screen: Go to the home screen

2️⃣ Favourites and Schedules: Using the dial move the box to the Favour icon

Image Added

3️⃣ Back button: To go back to the home page move the cursor up to the the back button and press the dial to select

4️⃣ Favourite / Schedule name: Rotate the dial to move the cursor to the Zone you want to adjust. Press the dial to enter the details for this favourite. By default the favourite names will be "Favourite 1, Favourite 2....etc

FAVOURITE DETAILS

Image Removed

1️⃣ Name of Favourite: This is the Favourite you are looking at

2️⃣ Press to edit Favourite name: Press the edit pencil to change the name of this favourite

3️⃣ Fan Speed for this Favourite: This is the current fan speed for this favourite. Press this button to toggle through the different fan speeds

4️⃣ Mode for this Favourite: This is the current mode for this favourite. Press this button to toggle through the different modes

5️⃣ Zone settings for this Favourite: These are the current zone settings for this favourite. Press the setting to change it. You can toggle from Closed>Open>Climate. To change the set point temperature on a Climate Controlled zone you will need to go to "Zones" and change the corresponding zone set point temperatures. Then return to favourites and set up the and save the favourite

6️⃣ Back button: Press the Back button to go back to the Favourite Summary

1️⃣ Active Schedule: The clock indicates this schedule is active and will start / stop the favourite on the scheduled days / times. To deactivate this schedule simply press the clock and the clock will disappear indicating the schedule has been paused

2️⃣ Schedule names: This is the Schedule Name. It uses the name of the Favourite you are scheduling to run. To change the name go to Favourites and change the name of the Favourite

3️⃣ Edit pencil: Press the edit pencil to open the details screen for a schedule. In this example it is the Early Morning Schedule

4️⃣ Back button: Press here to go back to the main menu screen

5️⃣ De-activated Schedule: The absence of a clock in the top right hand corner of the schedule button indicates this schedule is deactivated. To activate this schedule simply press the schedule button and a small clock will appear in the top right hand corner of the schedule button (See Active Schedule).

Image Removed

1️⃣ Schedule being edited: This is the name of the schedule / favourite that you are currently changing

2️⃣ Schedule Start time: This is the time this schedule will start (24 hour format)

3️⃣ Schedule Stop time: This is the time this schedule will stop (24 hour format)

4️⃣ Day this schedule will run: Press the day you want this schedule to run. This schedule will run on days that are coloured green

5️⃣ Days this schedule will not run: This schedule will not run on days that are white. Press active (green) days to change them to white

6️⃣ Press to delete this schedule: To delete all settings for this schedule press this button

7️⃣ Back to summary: Press to go back to the schedule summary and save the changes

8️⃣ Key pad to enter times: Use the keypad to change the start and stop times

Air quality is measured by the below metrics

Indoor Air Quality (IAQ) - Wikipedia Article

Relative Humidity (RH %) - Wikipedia Article

Volatile Organic Compounds (VOC ppb) - Wikipedia Article

Carbon Dioxide (CO2 ppm) - Wikipedia Article

For ease of understanding the iZone summarise the overall IAQ from the worst reading of the VOC and CO2 sensors. The categories and levels are as follows:

Each of the states and territories of Australia is responsible for monitoring air quality and publishing data in accordance with the national NEPM standards

Each state and territory publishes air quality data for individual monitoring locations, and most states and territories publish air quality indexes for each monitoring location

Across Australia, a consistent approach is taken with air quality indexes, using a simple linear scale where 100 represents the maximum concentration standard for each pollutant, as set by the NEPM

These maximum concentration standards are:

Pollutant

Averaging period

Maximum concentration standard

Carbon monoxide

8 hours          

9ppm

Nitrogen dioxide

1 hour

0.12ppm

Ozone

1 hour

0.10ppm

4 hours

0.08ppm

Sulphur dioxide

1 hour

0.20ppm

1 day

0.08ppm

1 year

0.02ppm

Lead

1 year

0.50 μg/m3

PM 10

1 day

50 μg/m3

1 year

25 μg/m3

PM 2.5

1 day

25 μg/m3

1 year

8 μg/m3

The air quality index (AQI) for an individual location is simply the highest of the air quality index values for each pollutant being monitored at that location

 AQI bands, with health advice for each:

AQI

Description

Health advice

0–33

Very Good

Enjoy activities

34–66

Good

Enjoy activities

67–99

Fair

People unusually sensitive to air pollution: Plan strenuous outdoor activities when air quality is better

100–149

Poor

Sensitive Groups: Cut back or reschedule strenuous outdoor activities

150–200

Very Poor

Sensitive groups: Avoid strenuous outdoor activities. Everyone: Cut back or reschedule strenuous outdoor activities

200+

Hazardous

Sensitive groups: Avoid all outdoor physical activities. Everyone: Significantly cut back on outdoor physical activities

Image Removed

1️⃣ Air Quality button: Go to the "Monitoring" tab and press the Air Quality button to access the air quality monitoring

2️⃣ Overall Indoor Air Quality: Based on all the parameters being measured this is a guide to the overall indoor air quality

3️⃣ Indoor VOC's being measured: This is the level of VOC's being measured at the the Nexus+ screen. Press the button "Good" to see the actual reading in parts per billion and a guide of VOC levels

4️⃣ Indoor CO2 being measured: This is the level of equivalent CO2 being measured at the the Nexus+ screen . Press the button "Great" to see the actual reading in parts per million and a guide of CO2 levels

5️⃣ Indoor Relative Humidity being measured: This is the level of RH being measured at the the Nexus+ screen in percentage. Press the button "Normal" to see the actual reading in % and a guide of RH levels

6️⃣ Outdoor Air Quality index: This is the outdoor AQI being measured at air quality station closest to your home. Press the button "Good" to see the actual reading and for a guide of AQI levels

7️⃣ Current outdoor relative humidity: The current outdoor relative humidity from the last reading received

5️⃣ Favourite button: Rotate the dial to move the cursor to the favourite you want to run . Press the dial to run this favourite

6️⃣ Edit pencil: Using the dial, move the cursor tot he edit pencil to edit a favourite / schedule. For more details on editing favourites and schedule see "Favourite / Schedule Details / Edit"

7️⃣ Schedule Active: An alarm clock as shown indicates this favourite has an active schedule. To change the schedule or to de-active the schedule see "Schedule Details / Edit"

8️⃣ Schedule de-activated: An alarm clock with a cross through it as shown indicates this favourite has a schedule which has been de-activated. To change the schedule or to active the schedule see "Schedule Details / Edit"

Image Added

1️⃣ Home screen: Go to the home screen. For instructions on how to go to the home screen click on this link

2️⃣ Favourites and Schedules: Using the dial move the box to the Favour icon

Image Added

3️⃣ Back button: To go back to the home page move the cursor up to the the back button and press the dial to select

4️⃣ Favourite / Schedule name: Rotate the dial to move the cursor to the Zone you want to adjust. Press the dial to enter the details for this favourite. By default the favourite names will be "Favourite 1, Favourite 2....etc.

5️⃣ Schedule Active: An alarm clock as shown indicates this favourite has an active schedule. To edit this schedule or to de-active the schedule select this icon. See "Schedule Details / Edit"

6️⃣ Schedule de-activated: An alarm clock with a cross through it as shown indicates this favourite has a schedule which has been de-activated. To edit this schedule or to active the schedule select this icon. See "Schedule Details / Edit"

Image Added

1️⃣ Back button: Press the Back button to go back to the Favourite Summary

2️⃣ Active days: Days this schedule will run are shown as below. (Black background and white text). Using the dial select a day and then press the dial to change the selected days

3️⃣ Schedule start time: This schedule will start at 18:05. on the days selected. To change the time use the dial to move the cursor to the required value > Press the dial to select > Rotate the dial to change the time> Press the dial to save the change

4️⃣ Schedule Stop time: This schedule will stop at 22:30 on the days selected. To change the time use the dial to move the cursor to the required value > Press the dial to select > Rotate the dial to change the time> Press the dial to save the change

5️⃣ Name of Favourite being scheduled: This is the favourite you are currently scheduling. To go to another favourite > Select the back button and select from the Favourite Summary

6️⃣ Inactive days: Days this schedule will not run are shown as below. (White background and black text). Using the dial select a day and then press the dial to change the selected days

7️⃣ Schedule is Activated to run: When a schedule is activated to run it will display as an alarm clock. To change > Select the icon and rotate the dial to change from Active to De-activated

When a schedule is de-activated to not run. For example when you go away on holiday. It will display as an alarm clock with a cross through it. To change > Select the icon and rotate the dial to change from Active to De-activated