Page Comparison

Image Removed

Image Added

Panel

1️⃣ Home Screen: Typical Modern style home screen

2️⃣ Colour Trim: Screens are supplied with different colour trim. Remove the trim supplied and replace it with the colour you prefer

3️⃣ AC Unit Summary: This is the AC Unit Summary. You can control the primary function directly from here or for more detailed control like zones press the button to access

4️⃣ Address: Tap on the address to change the site address

5️⃣ AC System Name: Tap on the system name to change it

6️⃣ Weather Tab: Press the Weather Tab to show the weather on the home page. The system will need to be registered on iZone Worldwide and have an internet connection to show the weather

7️⃣ Messages Tab: Tap on the message tab to review all system messages or alerts. If there is an alert the Message Tab will be red

8️⃣ Screen Settings Tab: Tap on the settings tab to access the Screen settings (Beep, Orientation, Child lock, Hide other services, Brightness, Contrast, Saturation, Graphic display style). Configuration and Scenes

9️⃣ Time & Date: Tap on the time / date to change it. Depending on the configuration setting the time and date may also be updated automatically with your mobile devices in the home

1️⃣ 0️⃣ Location: The location is downloaded from the iZone World wide sever. The system will need to be registered on iZone Worldwide and have an internet connection to show the location. The location will be based on the suburb you listed on the iZone Worldwide registration form

1️⃣ 1️⃣ Home Button: Press the Home Button on the Nexus+ screen to return to the home page at any time

1️⃣ 2️⃣ Air Quality: The AIQ is the outdoor Air Quality Index. Press the AQI and the screen will display the Outdoor and indoor Air Quality readings. The system will need to be registered on iZone Worldwide and have an internet connection to display the AQI. The actual AQI is measured at the AQI station closest to your location

1️⃣ 3️⃣ Relative Humidity: RH is the out door Relative Humidity. Press the AQI and the screen will display the Out Door and indoor readings. The system will need to be registered on iZone Worldwide and have an internet connection to display the RH. The actual RH is measured at the weather station closest to your location

1️⃣ 4️⃣ System Reset Button: iZone system reset button is located on the side or bottom of the screen depending on screen orientation

1️⃣ 5️⃣ Weather Forecast: The system will need to be registered on iZone Worldwide and have an internet connection to display the current outdoor weather and weather forecast. The weather is measured at the weather station closest to your location

Image Removed

1️⃣ AC System Summary: This is a typical Modern AC System Summary. If there is more than one AC system connected to this screen it may display multiple AC system summaries. The different systems are identified by the System name

2️⃣ System Name: The system name is displayed here. Press the name if you want to change it

3️⃣ AC Unit On / Off button: The AC unit can be turned on an off by pressing the On/Off button. When on the button will be green and the text below the button will read On. When off the button will turn red and the text below the button will read Off

4️⃣ AC Unit Mode button: Press the Mode button to change from Cool>Heat>Dry>Vent>Auto. When the Mode button is pressed The AC Unit Control screen will open

5️⃣ AC Unit Fan speed button: Press the Fan button to change from High>Med>Low>Auto fan speeds. When the Mode button is pressed The AC Unit Control screen will open

6️⃣ Zone adjustment: Press the Zones button to access the Zones Summary. When the Zones button is pressed The Zone summary will open

7️⃣ Favourites & Schedules: Press the Favourites button to access the Favourites and Schedule Summary. When the Favourite button is pressed The Favourites summary will open

8️⃣ Sleep Timer: Press the Sleep timer button to toggle different times from half and hour to 12 hours. When set the AC system will run for the selected period of time and then turn off automatically. If you require a more sophisticated schedule go to Schedules

9️⃣ iSave Control button: If fitted the iSave system can be manually turned on and off by pressing the iSave button. When the iSave system is turned on the AC unit will be changed automatically to Vent mode, the outside air dampers will open fully and the return air dampers will close fully. The zones will control as per normal. When the iSave system is turned off the AC unit will be changed automatically back to it's previous mode, the outside air dampers will close fully and the return air dampers will open fully

1️⃣ 0️⃣ Sensor Pair Button: You can use this pair button to pair devices to the iZone Aircon system like zone sensors, bridge etc

Image Removed

1️⃣ AC Unit System Summary: This is the AC unit system summary

2️⃣ To Open AC Unit Control Summary: To open the AC Unit Control window press either the Mode or Fan speed button

3️⃣ Current Controlling Set point: The current controlling set point is shown here. This view will differ depending on the configuration of the AC Unit Controlling sensor. In this graphic the AC unit is being controlled from "Zones" and the zone that is currently furthest from set point is the OFFICE

4️⃣ AC Unit Control Summary: This is the AC Unit control summary

5️⃣ Zone Currently Controlling AC unit: The name of the zone currently controlling the AC unit

6️⃣ Current Mode: The current mode is displayed here. Press the mode button to change

7️⃣ Current Fan Speed: The current fan speed is displayed here. Press the fan button to change

8️⃣ Current Outdoor Air Quality: A summary of the current outdoor air quality is displayed here. For details of the outdoor air quality press the Outdoor button

9️⃣ Current Indoor Air Quality: A summary of the current Indoor air quality is displayed here. For details of the Indoor air quality press the Indoor button

1️⃣ 0️⃣ Actual Temperature In Controlling Zone: The actual temperature in the controlling zone is displayed here

1️⃣ 1️⃣ System In Duct Temperature: The temperature of the air in the supply air duct is displayed here

System Reset Button: iZone system reset button is located on the side or bottom of the screen depending on screen orientation

2️⃣ AC System name: The AC system name is generated automatically by the system. Additional systems displayed on the same screen will have sequential numbers eg. 1,2,3....Tap on the icon to access this AC system

3️⃣ Scenes: Tap here to access the the scenes set up

4️⃣ Screen Beep: Press here to turn the screen beep on / off

5️⃣ Home button: Press the Home button 1-2 times to return to this Home screen

6️⃣ Home Screen: Typical Classic style home screen

7️⃣ Screen Settings: Tap here to change the screen settings including: Background Colour, Brightness, Contrast, Saturation, Graphic Style, Screen Orientation, Child Lock, Hide other services

8️⃣ Time & Date: Tap here to change the date and time

9️⃣ Wi-Fi: If a Wi-Fi bridge is paired it will display a Grey symbol as shown

1️⃣ 0️⃣ Colour Trim: Screens are supplied with different colour trim. Remove the trim supplied and replace it with the colour you prefer

Image Added

1️⃣ Return to main menu

2️⃣ ON/OFF Button: The AC unit can be turned on an off by pressing the On/Off button. When on the button will be green and the text below the button will read System is On. When off the button will turn red and the text below the button will read System is Off

3️⃣ AC Unit Control: Press the AC Unit button to access the AC Unit Control screen. In the AC Unit Control screen you can change modes, fan speeds, set points etc.

4️⃣ Zone Summary: Press the Zones button to access the Zones Summary. For an explanation of the different Zone configurations follow this link. When the Zones button is pressed The Zone summary will open

5️⃣ Zone Airflow Adjustment: Press the Zone Airflow button to access the Zone Airflows Summary. When the Zones button is pressed The Airflow summary will open

6️⃣ Favourites: Press the Favourites button to access the Favourites Summary. When the Zones button is pressed The Favourites summary will open

7️⃣ Schedules: Press the Schedules button to access the Schedules Summary. When the Zones button is pressed The Schedules summary will open

8️⃣ Sleep Timer: Press the Sleep timer button to toggle different times from half and hour to 12 hours. When set the AC system will run for the selected period of time and then turn off automatically. If you require a more sophisticated schedule go to Schedules

9️⃣ System Configuration: Press the Config button to access the system configuration settings. For details of how to access the configuration menu click on this link

1️⃣ 0️⃣ iSave: If fitted the iSave system can be manually turned on and off by pressing the iSave button. When the iSave system is turned on the AC unit will be changed automatically to Vent mode, the outside air dampers will open fully and the return air dampers will close fully. The zones will control as per normal. When the iSave system is turned off the AC unit will be changed automatically back to it's previous mode, the outside air dampers will close fully and the return air dampers will open fully

1️⃣ 1️⃣ Sensor Pair Button: You can use this pair button to pair devices to the iZone Aircon system like zone sensors, bridge etc

1️⃣ 2️⃣ Wi-Fi connection: The Wi-Fi connection symbol will only appear if a bridge. When first paired to the system the symbol will be grey. Once it is connected to a Wi-fi modem / router the symbol will change to green

1️⃣ 3️⃣ Messages and alerts: Messages and alerts will display in a box here. For maintenance messages like filter clean due, this message can be cleared by pressing the message several times

Image Removed

Image Added

1️⃣ Zones: When the "Zones" icon is pressed it will open the zone summary below. Press the Zones icon again and the summary will collapse

2️⃣ Zone Summary: The Zone will be listed here. Press on the Zone Set point or Airflow to open the Zone details

3️⃣ Zone Name: The Zone names are listed here

4️⃣ Zone Status: The current status of the zone is described here. By pressing the status it will toggle from Open>Closed>Climate.

5️⃣ Zone Set point: Zones configured for temperature control will display their current set point here. Press this temperature to access the zone details and make changes

6️⃣ Airflow % or Actual Temp: The % airflow or actual temperature for the zone will be displayed here. Press this % / temperature to access the zone details and make changesAC Unit Control Screen: This is the AC Unit Control Screen which is accessed via the AC System Summary

2️⃣ Current Mode: Current AC Mode. Press the button to change

3️⃣ Current AC Unit Status: The current AC Unit Status is described here. If a fault with the AC unit occurs it should be displayed here

4️⃣ Current Controlling Set point The current controlling set point is shown here. This view will differ depending on the configuration of the AC Unit Controlling sensor. In this graphic the AC unit is being controlled from "Zones" and the zone that is currently furthest from set point is "Research2" which is currently the zone that is furthest from set point

5️⃣ Controlling zone: The name of the zone currently controlling the AC unit

6️⃣ Current Fan speed: The current fan speed is displayed here. Press the fan button to change

1️⃣Press to Open Zone DetailsNames: Press on the Zone Set point or Airflow to open the details for the zoneThe Zone names are listed here

2️⃣ Zone Details Summary Screen: This is the Zone Details Summary Screen

3️⃣ Zone Set Point: This is the Zone Set Point (If fitted with temperatures sensors) Home Button: Press the home or back button to return to the AC system summary screen

4️⃣ Zone Name: The Zone Name will appear at the top of the Zone Details Screen

5️⃣ Increase Zone SP: To increase the Zone set point press the up arrow

6️⃣ Decrease Zone SP: To decrease the Zone set point press the down arrow

7️⃣ Close Zone: To close the zone, touch the Close button

8️⃣ Status: The zone status is detailed here as an icon and matching text. Press the text button to go to the zone details

Image Added

1️⃣ Office Zone Details Screen: This is the Zone Details Screen for the "Office"

2️⃣ Zone Set Point: This is the Zone Set Point (If fitted with temperatures sensors)

3️⃣ Open Zone: To open the zone, touch the Open button

9️⃣ 4️⃣ Current Zone Settingzone setting: The text back ground of the current zone setting will be displayed in dark blue font. To set a zone to climate (Temperature) control, touch the Climate Control button

1️⃣ 0️⃣ 5️⃣ Actual Zone TempTemperature: The current temperature in the zone will be displayed here

6️⃣ Home Button: Press the home or back button to return to the Zone Summary Screen

7️⃣ Increase SP: To increase the Zone set point press the up arrow

8️⃣ Decrease SP: To decrease the Zone set point press the down arrow

9️⃣ Close Zone: To close the zone, touch the Close button

1️⃣ 0️⃣ \System In Duct Temp: The current system supply air temperature will be displayed here

1️⃣ 1️⃣ 2️⃣ RF & Battery: The strength of the wireless sensors signal and it's battery capacity are displayed here

1️⃣ Zones: When the "Zones" icon is pressed it will open the zone summary below. Press the Zones icon again and the summary will collapse

2️⃣ Zone Summary: The Zones will be listed here. Press on the Airflow to open the Airflow details for this zone.

3️⃣ Zone Name: The Zone names are listed here. To change the name follow this link

1️⃣ Airflow Summary Screen: This is the Airflow summary screen

2️⃣ Zone Name: Zones are listed here

3️⃣ Current Min / Max Airflow %: Current airflow settings are detailed here. Press the Min/Max button to access the Airflow Details screen and edit the settings

Image Removed

1️⃣ Press Zones: Press on the Zones icon to open the zone summary

2️⃣ Press the Zone Airflow to Change: Press on the Zone Airflow to open the Airflow details for this zone

3️⃣ Image Added

1️⃣ Zone being edited: The Zone Name will appear at the top of the Airflow Details Screen

4️⃣ Airflow Details Screen: This is the Zone Airflow Details Screen

5️⃣ Increase / Decrease Max Airflow: Use the up and down arrows to edit the Maximum Airflow % to this zone. If these arrows are not visible the Airflow adjustment may have been locked

6️⃣ Increase / Decrease Min AirflowAirflow Details Screen

2️⃣ Press the arrows to change the Max Airflow%: Use the up and down arrows to edit the Minimum Airflow % Maximum Airflow% to this zone. If these arrows are not visible the Airflow adjustment may have been locked

To configure a schedule it is necessary to first create a Favourite with the Mode, Fan Speed and zone settings that you want to run when the schedule is active

Once the favourite has been created and tested it can then be scheduled to start and / or stop at the required timelocked

3️⃣ Press the arrows to change the Min Airflow%: Use the up and down arrows to edit the Minimum Airflow% to this zone. If these arrows are not visible the Airflow adjustment may have been locked

• Schedule A will start at 0:800 and will stop before its scheduled time at 08:45 as it has been overridden by Schedule B

• Schedule B will start at 0:845 and will stop before its scheduled time at 09:15 as it has been overridden by Schedule C

• Schedule C start and stop at its required schedule times of 09:15 - 10:40

Image Removed

Image Removed

1️⃣ Favourite Name: The name of the favourite is displayed here it is useful to name it something that indicates what the favourite does. To edit the name use the edit pencil to access the details of the favourite

2️⃣ Favourite status: To manually activate this favourite just press the star

3️⃣ Favourites & Schedules Button: Press this button on the AC System Summary to open the Favourites and Schedules

4️⃣ Favourite Edit: Press the edit pencil to open the details screen for a favourite.

5️⃣ Schedule Status: The green clock indicates this schedule is active and will start / stop the favourite on the scheduled days / times. To deactivate this schedule simply press the clock and it will change to red indicating the schedule has been paused

6️⃣ Schedule Edit: Press the edit pencil to open the schedule details screen for this favourite

Image Removed

1️⃣ Press the edit pencil: Press the edit pencil to open the details screen for a favourite. In this example it is the Early Morning favourite

2️⃣ Mode for this favourite: This is the current mode for this favourite. Press this button to toggle through the different modes

A favourite is a short cut which allows the user to press a single button to simultaneously make multiple changes to the zones status, set points, mode, fan speed

Once a favourite has been created it can then be scheduled to start and stop at specific times during a 7 day week

To configure a schedule it is necessary to first create a Favourite with the Mode, Fan Speed and zone settings that you want to run when the schedule is active

Once the favourite has been created and tested it can then be scheduled to start and / or stop at the required time

• Schedule A will start at 0:800 and will stop before its scheduled time at 08:45 as it has been overridden by Schedule B

• Schedule B will start at 0:845 and will stop before its scheduled time at 09:15 as it has been overridden by Schedule C

• Schedule C start and stop at its required schedule times of 09:15 - 10:40

Image Added

5️⃣ Zone settings for this favourite: These are the current zone settings for this favourite. Press the setting to change it. You can toggle from Closed>Open>Climate. To change the set point temperature on a Climate Controlled zone you will need to go to "Zones" and change the corresponding zone set point temperatures. Then return to favourites and set up the and save the favourite

6️⃣ Press to save changes: Once you are happy with all your changes press the Save button

If N/A is selected the iZone system will not change the mode when this favourite is activated

3️⃣ Edit favourite name: Press the name of the favourite here to change the name of this favourite

4️⃣ Fan speed for this favourite: This is the current fan speed for this favourite. Press this button to toggle through the different fan speeds

1️⃣ Favourites Summary: This is the Favourites Summary accessed from the AC System Summary

2️⃣ Press to edit: To edit a favourite press this "Assign Favourites" button then press the favourite you want to edit. This will take you to the Favourite's Detail screen

3️⃣ Favourite Name: The name of the favourite is displayed here it is useful to name it something that indicates what the favourite does. To edit the name follow the steps in 2 above

4️⃣ Press to run: To run a favourite just press the favourite button you want to run

Image Added

1️⃣ Name of Favourite: This is the Favourite you are looking at

2️⃣ Press to edit Favourite name: Press the edit pencil to change the name of this favourite

3️⃣ Fan Speed for this Favourite: This is the current fan speed for this favourite. Press this button to toggle through the different fan speeds

SCHEDULING SUMMARY

Image Removed

1️⃣ Favourite Name: The name of the favourite is displayed here it is useful to name it something that indicates what the favourite does. To edit the name use the edit pencil to access the details of the favourite

2️⃣ Favourite status: To manually activate this favourite just press the star

3️⃣ Favourites & Schedules Button: Press this button on the AC System Summary to open the Favourites and Schedules

4️⃣ Favourite Edit: Press the edit pencil to open the details screen for a favourite

5️⃣ Schedule Status: The green clock indicates this schedule is active and will start / stop the favourite on the scheduled days / times. To deactivate this schedule simply press the clock and it will change to red indicating the schedule has been paused

4️⃣ Mode for this Favourite: This is the current mode for this favourite. Press this button to toggle through the different modes

5️⃣ Zone settings for this Favourite: These are the current zone settings for this favourite. Press the setting to change it. You can toggle from Closed>Open>Climate. To change the set point temperature on a Climate Controlled zone you will need to go to "Zones" and change the corresponding zone set point temperatures. Then return to favourites and set up the and save the favourite

6️⃣ Back button: Press the Back button to go back to the Favourite Summary

1️⃣ Active Schedule is Active: When the clock is green the The clock indicates this schedule is active and will run start / stop the favourite on the required scheduled days and / times. Press the icon to To deactivate this schedule

2️⃣ Schedule Edit Pencil: Press the edit pencil to open the details screen for a schedule. In this example it is the Early Morning schedule

3️⃣ Schedule Namesimply press the clock and the clock will disappear indicating the schedule has been paused

2️⃣ Schedule names: This is the Schedule Name. It uses the name of the Favourite you are scheduling to run. To change the name go to Favourites and change the name of the Favourite4️⃣ Day of the week this schedule will run: The days this schedule will run are in a green circle. In this example the schedule will run Monday to Friday but will not run on Saturday and Sundayto run. To change the days the schedule will run simply press on the day you want to change

5️⃣ Start time is enabled: For a standard schedule you would normally enable both the start and the stop times. However it is possible for a schedule to not have a start time and only a stop time. For example in a commercial business you want the staff to start the AC system manually to save running costs when the weather is mild but you want it to turn OFF automatically at left running over night

6️⃣ Start time for this schedule: This is the time this schedule will start. You can adjust the hours and minutes to suit your requirementsname go to Favourites and change the name of the Favourite

3️⃣ Edit pencil: Press the edit pencil to open the details screen for a schedule. In this example it is the Early Morning Schedule

4️⃣ Back button: Press here to go back to the main menu screen

5️⃣ De-activated Schedule: The absence of a clock in the top right hand corner of the schedule button indicates this schedule is deactivated. To activate this schedule simply press the schedule button and a small clock will appear in the top right hand corner of the schedule button (See Active Schedule).

Please note it is a 24 hour clock

7️⃣ Stop time is enabled: For a standard schedule you would normally enable both the start and the stop times. However it is possible for a schedule to not have a stop time and only a start time. For example in a commercial business you want the system to automatically on in the morning but to only turn off when the security system is turned activated when all staff have left the building. (Additional hardware may be required)

8️⃣ Stop time for this schedule: This is the time this schedule will stop. You can adjust the hours and minutes to suit your requirements

9️⃣ Save schedule settings: Once you are happy with all your changes press the Save button

1️⃣ 0️⃣ Schedule is de-activated: When the clock is red the schedule is deactivated and will will not run. Press the icon to activate this schedule

Image Added

1️⃣ Schedule being edited: This is the name of the schedule / favourite that you are currently changing

2️⃣ Schedule Start time: This is the time this schedule will start (24 hour format)

3️⃣ Schedule Stop time: This is the time this schedule will stop (24 hour format)

4️⃣ Day this schedule will run: Press the day you want this schedule to run. This schedule will run on days that are coloured green

5️⃣ Days this schedule will not run: This schedule will not run on days that are white. Press active (green) days to change them to white

6️⃣ Press to delete this schedule: To delete all settings for this schedule press this button

7️⃣ Back to summary: Press to go back to the schedule summary and save the changes

8️⃣ Key pad to enter times: Use the keypad to change the start and stop times

Air quality is divided into two main areas- Indoor and Outdoormeasured by the below metrics

Indoor Air Quality (IAQ) - Wikipedia Article

Relative Humidity (RH %) - Wikipedia Article

Volatile Organic Compounds (VOC ppb) - Wikipedia Article

Carbon Dioxide (CO2 ppm) - Wikipedia Article

For ease of understanding the iZone summarise the overall IAQ from the worst reading of the VOC and CO2 sensors. The categories and levels are as follows:

Each of the states and territories of Australia is responsible for monitoring air quality and publishing data in accordance with the national NEPM standards

Each state and territory publishes air quality data for individual monitoring locations, and most states and territories publish air quality indexes for each monitoring location

Across Australia, a consistent approach is taken with air quality indexes, using a simple linear scale where 100 represents the maximum concentration standard for each pollutant, as set by the NEPM

These maximum concentration standards are:

The air quality index (AQI) for an individual location is simply the highest of the air quality index values for each pollutant being monitored at that location

 AQI bands, with health advice for each:

Image Removed

Image Added

1️⃣ Monitoring Tab: Scroll down Air Quality button: Go to the monitoring tab on the home screen"Monitoring" tab and press the Air Quality button to access the air quality monitoring

2️⃣ Overall Indoor Air Quality: Based on all the parameters being measured this is a guide to the overall indoor air quality

3️⃣ Indoor VOC's being measured: This is the level of VOC's being measured at the the Nexus+ screen in parts per billion. Press the button "Good" for to see the actual reading in parts per billion and a guide of VOC levels

4️⃣ Indoor CO2 being measured: This is the level of equivalent CO2 being measured at the the Nexus+ screen in parts per million . Press the button "Great" for to see the actual reading in parts per million and a guide of CO2 levels

5️⃣ Indoor Relative Humidity being measured: This is the level of RH being measured at the the Nexus + screen in percentage. Press the button "Normal" for a guide of RH levels6️⃣ Outdoor Air Quality index: This is the outdoor AQI being measured at air quality station closest to your homeof RH being measured at the the Nexus+ screen in percentage. Press the button "Good" for Normal" to see the actual reading in % and a guide of AQI RH levels

7️⃣ Current outdoor RH: Scroll down to view the current outdoor relative humidity

8️⃣ Current outdoor temperature: Scroll down to view the current outdoor dry bulb temperature

9️⃣ Air Quality button: Press the Air Quality button to access the air quality monitoring

1️⃣ 0️⃣ Outdoor expected conditions: Today's expected out door conditions

1️⃣ 1️⃣ Today's forecast maximum temperature: Today's expected maximum out door dry bulb temperature in degrees Celsius

1️⃣ 2️⃣ Today's forecast minimum temperature: Today's expected minimum out door dry bulb temperature in degrees Celsius

1️⃣ 3️⃣

6️⃣ Outdoor Air Quality index: This is the outdoor AQI being measured at air quality station closest to your home. Press the button "Good" to see the actual reading and for a guide of AQI levels

7️⃣ Current outdoor relative humidity: The current out door outdoor relative humidity from the last reading received.

1️⃣ 4️⃣ Sun rise and sun set times for this location: Today's sunrise and sun set times for the location used on this screen (Bibra Lake)

1️⃣ 5️⃣ 3 day weather forecast: The three day weather forecast for the location used on this screen (Bibra Lake)

8️⃣ Current outdoor temperature: The current outdoor dry bulb temperature from the last reading received