| Panel | ||||||
|---|---|---|---|---|---|---|
| ||||||
PAGE CONTENTS |
| Table of Contents |
|---|
| Panel | ||||||
|---|---|---|---|---|---|---|
| ||||||
PHOTO & DESCRIPTION |
The CCTSS# is the small capacitive user interface for the iZone 420 and 425 systems
1️⃣ Reset button: Press the reset button on the underside of the screen to reset the entire iZone air conditioning system
2️⃣ Colour touch screen
3️⃣ Trim: Colour trim is provided with each CCTSS# to decorate the CCTSS#
| Panel | ||||||
|---|---|---|---|---|---|---|
| ||||||
Trim is available in the following colours: White, Black, Silver, Gold |
4️⃣ Glass fascia: The front of the screen is made from hardened glass
5️⃣ Ventilation holes: Ventilation holes are provided on the top, bottom and back of the screen to encourage air circulation through the internals of the CCTSS#
| Panel | ||||||
|---|---|---|---|---|---|---|
| ||||||
This assists with cooling of the microprocessors and screens as well as inducing airflow across the internal air measurement sensors |
6️⃣ Home button: The home button is sensitive to touch (capacitive)
7️⃣ Wall bracket: Remove the wall bracket from the screen and mount it to a flat wall. Be careful not to over tighten the mounting screws if the wall is not flat as this will distort the wall bracket and the CCTSS# will not clip back onto the wall bracket
8️⃣ Wall bracket fixing holes: Use screws that sit flush inside the countersunk holes. If you use dome head screws the CCTSS# will not clip back onto the wall bracket
9️⃣ RJ 45 connector: This where you connect the CFC12S or CFC25S CAT 5E cable
1️⃣ 0️⃣ Back of CCTSS#: By turning the CCTSS# over and clipping the wall bracket on this is what you will seeCEPC is a wireless controller / sensor for iZone 150, 155, 400, 405, and 415 systems. It can also be used as a wireless zone controller on any iZone system
1️⃣ E paper screen: Low power E paper screen
2️⃣ Front cover
3️⃣ Dial / Selector: Rotate the dial to move to the next icon. Press the dial to select the required item.
4️⃣ Back cover
5️⃣ Rubber feet: Rubber feet for use when not mounted on a wall
6️⃣ Mounting holes for wall plate: These holes receive the mounting legs on the wall mount. To hang the controller insert the mounting legs into the mounting holes on the back cover and then slide the controller down. To remove the controller from the wall mount > Slide the controller up then pull forward
7️⃣ Battery Cover: To access the batteries remove the Phillips screw on the battery cover and lift the cover off. 2 x AAA batteries are required
8️⃣ Reset Controller: To reset the controller simply remove and replace one of the batteries.
9️⃣ Wall mount not show: The wall mount is not shown in this image for clarity
| Panel | ||||||
|---|---|---|---|---|---|---|
| ||||||
SPECIFICATIONS |
Model Number | CCTSSW, CCTSSB, CCTSSG, CCTSSSCEPC | ||||||||||
Power Supply | From C225, CNEM
| 2 x AAA batteries | |||||||||
Screen orientation | Landscape or PortraitOnly | ||||||||||
Screen graphic options | Classic Naked Only | ||||||||||
Fascia & trim colours | White, Black, Silver, Gold | ||||||||||
Power and communication connection | RJ 45 | ||||||||||
Communications ProtocolsCAN Bus | iZone 433Mhz proprietary wireless protocol | ||||||||||
Operating Temperature | Room temperature | ||||||||||
CCTSS# CEPC O/A Dimensions | Height 12 Height 30 mm (Excludes RJ45 connector and wall bracket but includes dial) Width 90 Width 95 mm Length 140 Length 153 mm | ||||||||||
Wall bracket Dimensions | Height 4 mm Width 72 89 mm Length 123 mmHoles 84 mm apart (To suit typical wall box)148 mm | ||||||||||
Weight | 171g 164 g (Includes Excludes wall bracket and trimbut includes batteries) |
| Panel | ||||||
|---|---|---|---|---|---|---|
| ||||||
EXPLODED VIEW OFCCTSS# |
1️⃣ Hardened glass facia
2️⃣ Colour Touch screen
3️⃣ Front plastic housing
4️⃣ Reset Button
5️⃣ Insulation / adhesion
6️⃣ PCB
7️⃣ Back plastic housing
8️⃣ Wall bracket
9️⃣ Screws
1️⃣0️⃣ Trim
CEPC |
