| Panel | ||||||
|---|---|---|---|---|---|---|
| ||||||
PAGE CONTENTS |
| Table of Contents |
|---|
| Panel | ||||||
|---|---|---|---|---|---|---|
| ||||||
PHOTO & DESCRIPTION |
The iZone System Multiplexer allows up to five iZone systems (C225 modules) to be displayed on up to three screens (CCTSL#)
1️⃣ Ports to CCTSL: 3 x RJ45 iZone Net ports for connection of up to three CCTSL screens
| Panel | ||||||
|---|---|---|---|---|---|---|
| ||||||
Screens connected to a Multiplexer cannot be used as zone or master temperature control sensors |
| Panel | ||||||
|---|---|---|---|---|---|---|
| ||||||
If one CCTSL+ screen is connected to the multiplexer the air quality measured by the CCTSL+ screen will be displayed on all other screens connected to the same multiplexer |
2️⃣ Ports to C225 modules: 5 x RJ45 iZone Net ports for connection of up to five C225 modules. Connection of C225 modules must start with CCPU1 port followed by CCPU2 etc
3️⃣ CNEM is an extension module for iZone Net ports to enable more screens or iSense controllers to be connected to a single system
1️⃣ Transformer JST VA connection: Connect the iZone transformer here. Part number CT24ACE
2️⃣ RJ 45 iZone Net Ports: There are 10 iZone Net ports from which screens, or iSense controllers can be connected
3️⃣ C225 port: Connect the C225 here
| Panel | ||||||
|---|---|---|---|---|---|---|
| ||||||
SPECIFICATIONS |
Model numbers |
CNEM & CNEMK |
Power supply |
(only supplied with CNEMK) | Zone transformer CT24ACE 24VAC 50Hz |
Casing material | Fire retardant ABS plastic |
Power connection (Only supplied with CISMK)
Zone transformer CT24ACE
Operating Temperature
Up to 65oC
(yellow or green) | |
Communication connection | RJ 45 |
Communications protocols | CAN Bus |
Number of systems
2-5
Number of CCTSL screens
2-3
Cables included - CNEMK only | CFC1 (CAT5 E) |
Number of iZone Net Ports | 10 |
Operating Temperature | Up to 65oC |
O/A Dimensions |
Height 30 mm Width |
118 mm Length |
155 mm | |
Weight | 227 g (Excludes transformer |
or cable) |