...
| Panel | ||||||
|---|---|---|---|---|---|---|
| ||||||
SETUP DIAGRAM |
| Panel | ||||||
|---|---|---|---|---|---|---|
| ||||||
QUICK GUIDE - HOW TO PAIR A WIRELESS SENSOR TO CPU? |
Remove the wireless sensor cover gently, using a flathead screwdriver
Remove the battery tab
Press and hold the PAIR button on the sensor and press PAIR icon on screen
Blue LED will flash rapidly and screen prompts updating information
Using a small flathead screwdriver, set the dip switch number on sensor to match it with the zone number that sensor will be installed
Click on Settings > Configuration > Configure Aircon > insert system password ‘wamfud’> Click on zones tab and change zone type to WIRELESS
Back in main menu, click on the zones summary and press the sensor button
When LED turns blue on sensor, zone status will change to climate control
When LED turns red on sensor, zone status will change to close
Make sure you see all three temperature setpoints, actual temperature and induct temperature on the screen
Put the sensor cover back on the sensor and install it on the wall according to iZone standards
| Panel | ||||||||
|---|---|---|---|---|---|---|---|---|
| ||||||||
VIDEO GUIDE - HOW TO PAIR A WIRELESS SENSOR TO CPU? |
...