Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Panel
panelIconIdatlassian-note
panelIcon:note:
bgColor#C0B6F2

WIRELESS SETUP DIAGRAM

1️⃣ iZone Bridge CL5B: For the most effective iZone wireless coverage locate the bridge as close as possible to the middle of the building off the floor

...

Panel
panelIconIdatlassian-note
panelIcon:note:
bgColor#C0B6F2

WIRED SETUP DIAGRAM

Panel
panelIconIdatlassian-note
panelIcon:note:
bgColor#C0B6F2

QUICK GUIDE - HOW TO PAIR THE IZONE BRIDGE TO THE CPU?

  1. Plug in your iZone Wi-Fi bridge to a power point

  2. Press and hold down the pair button on the bridge

  3. While holding the pair button, press the pair icon on the screen

  4. Once the pair LED flashes rapidly, you can release the pair button on the bridge

  5. Wait for the LEDs on the bridge to spin around, the LED with no label or icon stays on

  6. This means the bridge is paired with CPU successfully

  7. After a few seconds all the home automation options will appear on the home screen

  8. Now plug in your bridge to the Wi-Fi modem using the LAN cable provided

  9. Connect the LAN cable to the ethernet port on the bridge and LAN port on the modem

  10. When the bridge is connected to the modem, the LED with the globe icon on the bridge shows blue and the ethernet port orange and green lights stay on

Panel
panelIconIdatlassian-check_mark
panelIcon:check_mark:
bgColor#ABF5D1

DOUBLE CHECK THE CONNECTED BRIDGE INFORMATION

  1. Insert system password ‘wamfud', press enter, Then click on Wi-Fi bridge configuration

  2. You will see system ID number, IP and MAC address

  3. Now you can download the iZone Home App on your device and start using your new smart home system via your device

Panel
panelIconId1f3a5
panelIcon:movie_camera:
panelIconText🎥
bgColor#FFBDAD

VIDEO GUIDE - HOW TO PAIR THE IZONE BRIDGE TO THE CPU?

COCBINSTALLMP4.mp4