Page Comparison

...

1. You will need a flat head screwdriver to separate the C225 & C325#

2. On the topside, put the flat head screwdriver under the tab and begin to slowly lever the modules apart

   1. Once apart, inspect the pins for any damage, bent, broken, pushed in, if the male or female connectors have been damaged then you will need to order a replacement

3. If no damage has occurred, then reconnect the two modules

4. Perform a hard reset for 15mins for both the Unit and iZone

1. You will need a Philips head screwdriver to separate the C225 & C325#

2. On the topside, there is a screw holding the modules together

   1. Loosen the screw until it stops biting onto the C225

   2. You should now be able to easily pull away the C325# from the C225

   3. Once apart, inspect the pins for any damage, bent, broken, pushed in, if the male or female connectors have been damaged then you will need to order a replacement

3. If no damage has occurred, then reconnect the two modules

4. Perform a hard reset for 15mins for both the Unit and iZone

...