| Panel | ||||||
|---|---|---|---|---|---|---|
| ||||||
C325L2: LG |
| Panel | ||||||
|---|---|---|---|---|---|---|
| ||||||
LG Compatibility: AWY-7G6 Series |
| Panel | ||||||
|---|---|---|---|---|---|---|
| ||||||
Can use RA, Zones, Master or RF as controlling sensor |
| Panel | ||||||
|---|---|---|---|---|---|---|
| ||||||
Polarity is not critical |
Connect the LG supplied cable from the fan coil unit to the iZone C225 module Only use the black and yellow cables
...
1️⃣ Connect black and yellow wires only: Use the connector supplied with the LG unit to connect from the fan coil to the iZone C225. Only connect the black and yellow cables to the C225. Polarity is not critical
2️⃣ LG control cable: Connect black and yellow cables only.
3️⃣ Red cable not used: Red cable is not required for iZone connection
...
| Panel | ||||||
|---|---|---|---|---|---|---|
| ||||||
C325M2: MITSUBISHI ELECTRIC |
| Panel | ||||||
|---|---|---|---|---|---|---|
| ||||||
Mitsubishi Electric Compatibility: PE-M##GAA New MR Slim series (Must be C325M2) |
| Panel | ||||||
|---|---|---|---|---|---|---|
| ||||||
C320M & C325M have been superseded by C325M2 |
| Panel | ||||||
|---|---|---|---|---|---|---|
| ||||||
Can use RA, Zones, Master or RF as controlling sensor |
| Panel | ||||||
|---|---|---|---|---|---|---|
| ||||||
Polarity is not critical |
Take the Remote Controller (A / B) control wire from the fan coil unit and connect it to the AC Unit Control Cable on the C225 / C325M2
...
Connect to A / B terminals: Connect wires to to A and B terminals. Polarity is not critical
...
Mitsubishi Electric FCU PCB
...
C225: iZone C225 module with C325M2 AC unit module connected
...