| Panel | ||||||
|---|---|---|---|---|---|---|
| ||||||
PAGE CONTENTS |
| Table of Contents |
|---|
| Panel | ||||||
|---|---|---|---|---|---|---|
| ||||||
PHOTO & DESCRIPTION |
The
...
CZCO# is a
...
1️⃣ E paper screen: Low power E paper screen
2️⃣ Front cover
3️⃣ Dial / Selector: Rotate the dial to move to the next icon. Press the dial to select the required item.
4️⃣ Back cover
5️⃣ Rubber feet: Rubber feet for use when not mounted on a wall
6️⃣ Mounting holes for wall plate: These holes receive the mounting legs on the wall mount. To hang the controller insert the mounting legs into the mounting holes on the back cover and then slide the controller down. To remove the controller from the wall mount > Slide the controller up then pull forward
7️⃣ Battery Cover: To access the batteries remove the Phillips screw on the battery cover and lift the cover off. 2 x AAA batteries are required
8️⃣ Reset Controller: To reset the controller simply remove and replace one of the batteries.
...
wired zone controller with the ability for the end user to adjust set points, airflows etc
The CZCO# also incorporates an occupancy sensor that can be configured to adjust the set point or close the zone or both if no movement is detected after a period of time
...
1️⃣ Zone name: The Zone name is displayed here. It can be changed on the touch screen or via the App
2️⃣ Max Airflow setting: The current airflow setting is displayed here. It can be adjusted by pressing the airflow button and using the increase and decrease buttons to adjust the maximum airflow
3️⃣ Open Zone: Press here to open the zone fully. (It will open to the maximum airflow setting
4️⃣ iSense Activate / Deactivate: Press here to activate or deactivate the iSense control. When activated the eye will open and the controller will be looking for movement to
| Panel | ||||||
|---|---|---|---|---|---|---|
| ||||||
Press and hold this button to configure the iSense settings |
5️⃣ Movement sensor: The sensor looks for movement to automatically control the zone
6️⃣ Setpoint Temperature: This is the desired set point temperature. In the climate control mode press the increase and decrease arrows to change the setpoint temperature
7️⃣ Time: Displays the iZone system time. This can be changed on the touch screen or in the App
8️⃣ Indicates iSense is Active: An open eye indicates the movement sensor is active. If the eye is closed the movement sensor has been deactivated and will not automatically control the zone from movement in the room
9️⃣ Current Zone temperature: This is the actual temperature in the zone at present.
1️⃣ 0️⃣ Supply air temperature: This the temperature of the supply air in the ductwork. (Indicative only)
1️⃣ 1️⃣ Close Zone: Press here to close the zone to its minimum setting
1️⃣ 2️⃣ Climate Control: Press here for the zone to automatically open and close to control the temperature in the zone
| Panel | ||||||
|---|---|---|---|---|---|---|
| ||||||
It will be overridden if the iSense is active and the room is not occupied for the required time |
1️⃣ 3️⃣ Increase: Use this button to increase the setting
1️⃣ 4️⃣ Airflow adjustment: Press this button to change the maximum airflow to the zone.
1️⃣ 5️⃣ Decrease: Use this button to decrease the setting
1️⃣ 6️⃣ RJ45 connector on back: The RJ45 connects CFC12S or CFC25S to a C225 or CNEM modules
1️⃣ 7️⃣ System reset button on underside: The reset button is recessed on the underside of the controller
| Panel | ||||||
|---|---|---|---|---|---|---|
| ||||||
If pressed the whole iZone system will go into initialisation and reset |
| Panel | ||||||
|---|---|---|---|---|---|---|
| ||||||
SPECIFICATIONS |
Model |
...
numbers | CZCOW, CZCOO, CZCOB |
Power |
...
2 x AAA batteries
...
Screen orientation
...
Landscape Only
...
Screen graphic options
...
Naked Only
...
Communications Protocols
...
iZone 433Mhz proprietary wireless protocol
...
Operating Temperature
...
Room temperature
...
CEPC O/A Dimensions
...
Height 30 mm (Excludes wall bracket but includes dial)
Width 95 mm
Length 153 mm
...
Wall bracket Dimensions
...
Height 4 mm
Width 89 mm
Length 148 mm
...
Weight
...
164 g (Excludes wall bracket but includes batteries)
| Panel | ||||||
|---|---|---|---|---|---|---|
| ||||||
EXPLODED VIEW OF CEPC |
...
supply | From RJ45 connector |
Movement detection | Range - 7 meters (approx.) Viewing angle - 120o (approx.) |
Casing material | Polycarbonate and ABS plastic Facia colours available - White, Ocean Mist, Black |
Operating Temperature | 80 to -14oC |
Communications protocols | CAN Bus - Wired |
Communication range | 35 meters (If the cable length is increase longer than 35 meters the reading will not be accurate) |
O/A Dimensions | Height 20 mm Width 72 mm Length 116 mm |
Weight | 132 g |