Page Comparison

Custom made 2 core + Earth cable for connection to Midea FCU connector CN40 to C225 AC unit cable terminal

1️⃣ X Connection: Red is the X connection to the C225 AC unit cable terminal

2️⃣ Y Connection: White is the Y connection to the C225 AC unit cable terminal

3️⃣ Cable: The cable is 1.5 meters long with a protective sheath

4️⃣ CN40: Midea FCU proprietary connector see pin out diagram to confirm X and Y connectionsThe CDAK6 is a double adaptor to drive two damper motors to be driven from a single zone port on the C225 or CEXT modules

Image Added

1️⃣ Connector: This is an RJ11 or RJ12 jack for which connects into the C225 or CEXT damper ports

2️⃣ Fly lead

3️⃣ Double adaptor: This converts from 1 to 2 ports

4️⃣ Damper motor ports: Connect damper cables into these ports. Ensure the same type is used as the damper port and C225 ports (RJ11 or RJ12)