| Panel | ||||||
|---|---|---|---|---|---|---|
| ||||||
PAGE CONTENTS |
| Table of Contents | ||||
|---|---|---|---|---|
|
| Panel | ||||||
|---|---|---|---|---|---|---|
|
...
SETUP DIAGRAM
...
PHOTO & DESCRIPTION |
The CCTSL# is the large capacitive user interface for the iZone 430 and 435 systems
| Panel | ||
|---|---|---|
|
...
|
...
|
...
QUICK GUIDE - HOW TO PAIR A WIRELESS SENSOR TO CPU?
Remove the wireless sensor cover gently, using a flathead screwdriver
Remove the battery tab
Press and hold the PAIR button on the sensor and press PAIR icon on screen
Blue LED will flash rapidly and screen prompts updating information
Using a small flathead screwdriver, set the dip switch number on sensor to match it with the zone number that sensor will be installed
Click on Settings > Configuration > Configure Aircon > insert system password ‘wamfud’> Click on zones tab and change zone type to WIRELESS
Back in main menu, click on the zones summary and press the sensor button
When LED turns blue on sensor, zone status will change to climate control
When LED turns red on sensor, zone status will change to close
Make sure you see all three temperature setpoints, actual temperature and induct temperature on the screen
Put the sensor cover back on the sensor and install it on the wall according to iZone standards
| Panel | ||||||||
|---|---|---|---|---|---|---|---|---|
| ||||||||
VIDEO GUIDE - HOW TO PAIR A WIRELESS SENSOR TO CPU? |
...
| ||
Only the Nexus+ comes with an Air Quality Sensor |
1️⃣ Glass fascia: The front of the screen is made from hardened glass
2️⃣ Colour touch screen
3️⃣ Home button: The home button is sensitive to touch (capacitive)
4️⃣ Reset button: Press the reset button on the underside of the screen to reset the entire iZone air conditioning system
5️⃣ & 1️⃣ 0️⃣ Ventilation holes: Ventilation holes are provided on the top, bottom and back of the screen to encourage air circulation through the internals of the CCTSL#
| Panel | ||||||
|---|---|---|---|---|---|---|
| ||||||
This assists with cooling of the microprocessors and screens as well as inducing airflow across the internal air measurement sensors |
6️⃣ Colour Trim: Colour trim is provided with each CCTSL# to decorate the CCTSL#
| Panel | ||||||
|---|---|---|---|---|---|---|
| ||||||
Trim is available in the following colours: White, Black, Silver, Gold |
6️⃣ Back of CCTSL#+: By turning the CCTSL# over and clipping the wall bracket on this is what you will see
7️⃣ Wall bracket: Remove the wall bracket from the screen and mount it to a flat wall.
| Panel | ||||||
|---|---|---|---|---|---|---|
| ||||||
Be careful not to over tighten the mounting screws if the wall is not flat as this will distort the wall bracket and the CCTSL# will not clip back onto the wall bracket |
8️⃣ RJ45 Connector: This where you connect the CFC12S or CFC25S CAT 5E cable
9️⃣ Wall bracket fixing holes: Use screws that sit flush inside the countersunk holes
| Panel | ||||||
|---|---|---|---|---|---|---|
| ||||||
If you use dome head screws the CCTSL# will not clip back onto the wall bracket |
| Panel | ||||||
|---|---|---|---|---|---|---|
| ||||||
SPECIFICATIONS |
Model Number | CCTSLW, CCTSLB, CCTSLG, CCTSLS, CCTSLW+, CCTSLS+ |
Power Supply | From C225, CNEM or CISM modules |
Screen orientation | Landscape or Portrait |
Screen graphic options | Modern and Classic |
Fascia & trim colours | White, Black, Silver, Gold |
Power and communication connection | RJ 45 |
Communications Protocols | CAN Bus |
Operating Temperature | Room temperature |
CCTSL#+ O/A Dimensions | Height 12 mm (Excludes RJ45 connector and wall bracket) Width 121 mm Length 195 mm |
Wall bracket Dimensions | Height 4 mm Width 95 mm Length 144 mm Holes 84 mm apart (To suit typical wall box) |
Weight | 341 g (Includes wall bracket and trim) |
| Panel | ||||||
|---|---|---|---|---|---|---|
| ||||||
EXPLODED VIEW OF CCTSL# |
1️⃣ Hardened glass facia
2️⃣ Touch screen
3️⃣ PCB
4️⃣ Reset Button
5️⃣ Wall bracket
6️⃣ Screws
7️⃣ Trim
8️⃣ Front plastic housing
9️⃣ Back plastic housing