| Panel | ||||||
|---|---|---|---|---|---|---|
| ||||||
PAGE CONTENTS |
| Table of Contents |
|---|
| Panel | ||||||
|---|---|---|---|---|---|---|
| ||||||
PHOTO & DESCRIPTION |
The COCB is a wireless or wired open connection bridge that connects the iZone air conditioning and Home Automation systems to the home Wi-Fi to enable the control of iZone systems via a smart phone, tablet or voice activation via a 3rd party device
1️⃣ Antenna: RF 433MHz antenna. For wireless communication with C225 and wireless iZone devices
2️⃣ Reset button: To reset the COCB press this button.
3️⃣ iZone World Wide LED: This LED indicates that the bridge is communicating with the iZone World Wide Server
4️⃣ Pairing LED: This LED will flash when the COCB is in the process of pairing to the system
5️⃣ Pair button: Press this button to pair the COCB to the system
6️⃣ Wall mounting point on back: A hanging bracket is incorporated on the back of the COCB to enable the device to be hung from a single point on a wall or similar
7️⃣ Ethernet activity LED: This LED indicates the COCB is connected to a network and is communicating
8️⃣ Wireless LED: This LED indicates RF 433MHz wireless communication with wireless devices. If the COCB is hard wired to the C225 via the CGB2C35 cable it will indicate CAN communication with the C225
9️⃣ Rubber feet for desk top mounting: 4 small rubber feet are installed for mounting on a desk similar
1️⃣ 0️⃣ Power jack Port: The COCB power adaptor is connected here
1️⃣ 1️⃣ Ethernet RJ45 Port: Connect a CAT5 cable from the home Wi-Fi router (LAN) or network to this Ethernet port on the COCB
1️⃣ 2️⃣ iZone Net Port: If a wired connection between the C225 module and this bridge is required, a special cable (CGB2C35) is used to connect the C225 module and the COCB bridge via this iZone Net Port
C325 modules contain the required communication protocol for the control of different brands of ducted air conditioning units. The C325 needs to be connected to the C225 module to operate correctly
1️⃣ C325 AC unit module: AC unit interface module will allow full integration of the AC unit and the iZone
2️⃣ Connection pins to C225 or CEXT: Ensure the pins are aligned with the female connector and take care when clipping modules together
3️⃣ Model number / AC unit brand: Each brand of AC unit has its own unique model number as the protocols and PCB hardware for each brand is different
4️⃣ AC unit brand this module is uses on: Written description of unit brand this module is to be used on
| Panel | ||||||
|---|---|---|---|---|---|---|
| ||||||
SPECIFICATIONS |
Model Number |
C325# |
Power |
Separate power supply provided
AC/DC Adaptor
Input: 100-240V ~0.3A 50-60Hz
Output: 5V ~1A
Supply | From C225 / CEXT connection |
Casing material | Fire retardant ABS plastic |
Operating Temperature | Up to |
Cable included
CFC1 (CAT5E)
65oC |
Communications protocols |
RF 433 MHz - Wireless
CAN Bus - Wired
To suit AC unit brand connected |
O/A Dimensions |
Height 35 mm (Excludes Antenna)
Width 95 mm
Height 32 mm Width 119 mm Length 65 mm (When connected) |
Weight (Excludes power supply) |
86 g |