...
1️⃣ iZone smart plug: After pairing the iZone smart plug, it must be changed in the configuration area to a “Garage Door” as indicated above.
2️⃣ iZone voltage free relay: Plug the iZone voltage free relay into the iZone smart plug.
3️⃣ Voltage free terminals: Connect the Voltage free terminals in to the existing garage door controller.
4️⃣ Existing garage door opener: This is your existing garage door controller.
5️⃣ Existing garage door power supply: This is your existing garage door power supply.
6️⃣ iZone reed switch: Pair and group Mount the reed switch to onto the system and mount onto door / frameSee full .
If you still have not paired and configured the reed switch yet, please find the installation guide here for the reed switch - CRS: Reed Switch - Install Guide
7️⃣ Existing GPO: If your existing garage door GPO has two power points. Use the existing garage door GPO.
8️⃣ Double adaptor: If the existing GPO is a single power point, use a double adaptor to provide power to the smart plug and the existing garage door controller.
| Panel | ||||||
|---|---|---|---|---|---|---|
| ||||||
After installation and Configuration, test the operation of the door several times to ensure correct operation. If the door does not operate correctly change the pulse length, then re-test |
| Panel | ||||||
|---|---|---|---|---|---|---|
| ||||||
HOW TO PAIR VIDEO |
...