...
| Panel | ||||||
|---|---|---|---|---|---|---|
| ||||||
PHOTO & DESCRIPTION |
1️⃣ Smart plug: Smart plugs can be used for remote control of 240V devices powered from a standard AU general purpose outlet
2️⃣ Australian plug: AU Plug
3️⃣ Pair button: The pair button is located on the side of the iZone smart plug. Press and hold the pair button while pressing the pair button on the App or on the iZone screen. The LED will flash red rapidly to indicate it is paring to the system
4️⃣ Manual On/Off button: The smart plug can be controlled manually from the on off button. When on the LED behind the button will be blue and when off it will be red
| Panel | ||||||
|---|---|---|---|---|---|---|
| ||||||
SPECIFICATIONS |
Model numbers | CGPO |
Certification | AS/NZS 61058 ; C Tick N29007; |
Power supply | Input: 220 - 240VAC 50Hz |
Power consumption | Maximum 1.9 Watts switched on (no load connected) Minimum 0.6 Watts switched off |
Maximum connected load permitted | 10 amps |
Connection | Australian GPO and Australian Plug |
Control frequency | 433 MHz |
Operating Temperature | -5oC to +40oC |
Environment | Suitable for indoor use only |
Requirements | An iZone bridge (COCB) is required to control a smart plug |
Size & Weight | Height 107 mm Width 44 mm Depth 37 mm (Excludes prongs) Weight 89g |
| Panel | ||||||
|---|---|---|---|---|---|---|
| ||||||
INSTALLATION |
1️⃣ Remove the smart plug from the packaging
...
| Panel | ||||||
|---|---|---|---|---|---|---|
| ||||||
PAIRING |
1️⃣ Pair the iZone smart plug to the iZone Bridge by pressing the pair button on the smart plug and on the screen simultaneously
...
| Panel | ||||||
|---|---|---|---|---|---|---|
| ||||||
CONFIGURE |
1️⃣ Name your smart plug on the screen or app
...
| Panel | ||||||
|---|---|---|---|---|---|---|
| ||||||
USE YOUR SMART PLUG |
1️⃣ Plug the appliance to be controlled into the iZone smart plug
...