Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Panel
panelIconIdatlassian-info
panelIcon:info:
bgColor#B3D4FF

PAGE CONTENTS

Table of Contents
minLevel1
maxLevel7

Panel
panelIconIdatlassian-note
panelIcon:note:
bgColor#C0B6F2

PHOTO & DESCRIPTION

This module is installed in between a standard light switch and any permanently fixed lights that is controlled by the light switch.  The module is used to switch a light or set of lights on/off via the iZone smart system.  The module is connected to the customer’s own light switch to detect if the lights must be switched on/off. 

Info

The CACRSW and CACDSW is similar in nature, the difference is that the CACRSW cannot dim lights (it only switches lights on/off)

 

Image Modified
Panel
panelIconIdatlassian-note
panelIcon:note:
bgColor#C0B6F2

SPECIFICATIONS

Power supply

Input: 240VAC 50Hz

Power consumption

Maximum  2.05 Watts switched on

(no load connected)

Minimum 1.2 Watts switched off

Connection

Wired by electrician in accordance with AS/NZ 3000:2007 Electrical installations.

Maximum connected load permitted

1 Amp

Control frequency

433 Hz

Operating temperature range

-20oC to +50oC

Environment

Suitable for indoor use only

Size & Weight

Height: 150 mm (Excludes mounting lugs and antenna)

Width: 85 mm

Depth: 36 mm (Excludes antenna)

Weight: 220 g

Panel
panelIconIdatlassian-info
panelIcon:info:
bgColor#B3D4FF

Certification: AS/NZS 61058 ;  C Tick  N29007;

Panel
panelIconIdatlassian-note
panelIcon:note:
bgColor#C0B6F2

WIRING DIAGRAM

Image Added
Panel
panelIconIdatlassian-note
panelIcon:note:
bgColor#C0B6F2

INSTALLATION

1️⃣ Switch the power off at the switchboard

2️⃣ Cut the circuit to the device being controller and terminate the wiring as indicated on the casing

3️⃣ Wire the wall switch LED (if applicable) to the module

...

Panel
panelIconIdatlassian-note
panelIcon:note:
bgColor#C0B6F2

PAIRING

1️⃣ Pair the relay switch module to the iZone Bridge (See pairing an iZone smart plug)

...

Image Added

Image Added

Image Added

2️⃣ The blue LED adjacent to the pair button on the module will flash blue several times to indicate it is pairing

Panel
panelIconIdatlassian-note
panelIcon:note:
bgColor#C0B6F2

CONFIGURATION

1️⃣ Name the Relay switch module on your touch screen, smart phone or tablet

...

2️⃣ Group your Relay Switch module to other devices or switches

3️⃣ In the details section, configure the following: Switch type (latching/momentary); Switch LED (On/Off when lights are ON)

...

7️⃣ Control your appliance via the touch screen, smart phone / tablet or iZone wireless switch or the on / off button on the relay switch module.

8️⃣ Schedules, scenes, voice control, all ON / OFF, iSense control, alarm and holiday features can all be set up to control this module

...

panelIconIdatlassian-info
panelIcon:info:
bgColor#B3D4FF

...