Versions Compared

Version Old Version 3 New Version Current
Changes made by

Farhaan Yousuf Sheriff

Farhaan Yousuf Sheriff

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

  1. Open the iZone Home app on the Nova wall controller.

  2. Go to Menu → Settings, select Installer, and enter your installer ID.

  3. Now, navigate to Category → iZone Hub, then click on the hub listed under this tab.

  4. Record the CPU ID (this step is important).

  5. Then, click on the cog button on top right and enter the hub settings

  6. Here, record the RF channel (this step is important).

  7. Next, click unpair Hub from CPU option.

  8. Once you have both the CPU ID and RF channel and unpaired the hub from the CPU, disconnect the existing hub and connect the new hub to the router/modem.

  9. Close and re-open the iZone Home app.

  10. Go to Menu → Settings, click on the hub ID under Systems, and select Pair Hub to CPU.

  11. Enter the recorded CPU ID and RF channel, then click "SetPair."

After completing these steps successfully, the new hub will be paired with the system, and the Nova wall controller and iZone Home app will be ready to use with the new COCBH.

...