PAGE CONTENTS
WIRING DIAGRAM - iZONE 150 & 155
iZone 150 & 155 is an integrated air conditioning unit and zone controller that uses a E-paper screen (CEPC) for the graphic user interface
Zones can be temperature controlled by adding iZone sensors and an induct temperature sensor
The iZone 150 system does not include Wi-Fi control as it is supplied without a bridge
The iZone 155 is supplied with an iZone Bridge, the user can control the AC and zones via Wi-Fi from their smart phone or tablet. Other iZone automation products such as lighting, irrigation, garage door control etc can also be added and controlled
iZone 150 & 155 can be configured as 0-6 zones only
iZONE 150 WITH 0-6 ZONES
iZONE 155 WITH 0-6 ZONES
PAIRING THE CEPC TO C150
Remove the battery tab
Once in the Configuration section>Select System > Scroll down to Pair device > Select >
1️⃣ Select Pair Device: This is used to pair the CEPC to the system. Sensor and the bridge can be paired using the pair button on the home screen
2️⃣ Select to exit: To exit the System Config dial anti-clockwise to ≤ then press the dial to exit