Carrier Compatibility: SHDV series inverter ducted, single phase units only
42SHDV095 / 38SHDV095 ( 9.5kW )
42SHDV105 / 38SHDV105 ( 10.5kW )
42SHDV125 / 38SHDV125 ( 12.5kW )
42SHDV140 / 38SHDV140 ( 14kW )
42SHDV165 / 38SHDV165 ( 16.5kW )
Current Firmware Version - 1.0
Can use RA, Zones, Master and RF as controlling sensor
Polarity is critical see below, for correct connection
Connect a shielded, 2 core, twisted pair control cable from the C225 / C325A to the X / Y in the fan coil unit. This cable and connector is supplied by iZone - CACUCM15
1️⃣ Indoor fan coil unit PCB
2️⃣ CN40: Connect to X and Y
3️⃣ C225 AC unit connector: Connect AC unit cable from fan coil to C225 as indicated
4️⃣ Polarity is critical: Make sure it is wired in accordance with these instructions on both the CN40 connector on the fan coil PCB and the C225 cable connector
5️⃣ Cable from CN40: Ensure the cable is shielded, 2 core, twisted pair. This cable is pre-terminated suitable for CN40 connector and is supplied by iZone