Mitsubishi Heavy Industries Compatibility:
SERIES & kW | INDOOR | OUTDOOR |
FDU Series |
|
|
FDUA Series |
|
|
FDUM Series |
|
|
KX Series |
|
|
Indoor models FDUA200VG, FDUA200VF and FDUA200VH are compatible.
Current Firmware Version - 1.5
Can use RA, Zones, Master or RF as controlling sensor
Polarity is not critical
Please note master/slave options are not available on MHI units
Take the Remote Controller (X / Y) control wire from the fan coil unit and connect it to the AC Unit Control Cable on the C225 / C325MHI2
1️⃣ Connect to X / Y terminals: Connect wires to X and Y terminals. Polarity is not critical
2️⃣ MHI FCU PCB
3️⃣ C225: iZone C225 module with C325MHI2 AC unit module connected
4️⃣ Shielded, 2 Core, twisted pair: This cable is not provided by iZone