iZone Home 3.0.17 - Sep 2024
General enhancements
Support AC unit brand based setpoint range
Changes to make white label interface easier.
Nova controller enhancement
Make homepage header time clickable, quick to Android time settings
Rapid Setup (QR Code) support VRF configurations
Bug fixes
Fix group setting page crash.
Remove ‘Sync from cloud’ option.
Add second room failed bug.
Expand zone area selection max to 255 m2.
Other bug and typo fixes
iZone Home 3.0.16 - Aug 2024
Show AC mode and set point in zone control screen
The AC mode and AC set point (for return air) is shown as a short cut on each zone control page.
Include the ability to pair a zone temperature sensor to a constant zone
*Require firmware versions COCBH v4.28, C225/C150/C155 v3.67 and higher
Introduce a new zone type called a Constant with temp sensor. This allows an installer to pair a zone temperature sensor to a constant zone. This feature will be rolled out in later versions of the COCBH and CPU modules.
Display damper positions in zone settings
*Require firmware version COCBH v4.25 and higher
Show red dot for AC no comms
The red dot on the home screen implies a) no comms between the Nova controller and smart hub OR b) no comms between the smart hub and CPU module. Check diagnostic settings to confirm.
Support AC VRF subsystems
Install an iZone VRF host module and show all fan coil units and zones on the home page.
Nova controller enhancements
New installer account interface:
Allow an installer to switch between his own linked AC unit and a homeowner’s system when onsite.
Add valid test link to check error code, fault history, test system in one page.
Auto detect Smart Hub (COCBH) when available on network (no need to open/close the app).
Show a list of available Wi-Fi SSIDs when trying to connect the smart hub (COCBH) to a WiFi network without a CAT5 cable.
After joining Wi-Fi hotspot, the Nova will connect to the same Wi-Fi automatically.
Provide installer with the ability to set C225 to default settings i.e. restore zone count, names and types to factory settings.
General enhancements
Support ‘sprinklers stop watering’ as a trigger option in recipes
Allow a user to order the available systems in the header of the home page.
Support solar diversion configuration settings and control
Bug fixes
Fix set Wi-Fi in hotspot mode.
Fix Centurion garage door token can’t be copied in Android app.
Other bug and typo fixes
iZone Home 3.0.15 - Jul 2024
General enhancements
Change colour of icons in header of home screen to represent AC modes.
Change the icon of a zone tile.
Display ‘No Comms’ if an AC unit is not connected.
Add pair wireless extender
Changed device pinned sync roles.
Add geofencing into Recipe
Add more days options for system lockout
Improve local communication
Nova controller enhancements
Display time in home page and sync time to smart hub (COCBH)
Support batch pair temperature sensor in setup wizard.
Support pair iZone Hub to CPU (need COCBH and CPU updated)
Support set system RF selection (need COCBH and CPU updated)
Support go back to setup wizard from iZone Hub -> Settings
Bug fixes
Fix app stuck issues at iZone Logo caused by old app file system lockup.
Fix text size for some font size zoomed Android devices.
Fix setup wizard no zone job pin device cause crash.
Fix rapid setup zone type bug.
Other bug and typo fixes
iZone Home 3.0.14 - May 2024
General enhancements
Change setpoint slider colour to gradient blue when in Cool mode and to gradient red when in Heat mode
Support Hot Water subsystem.
Support All On/Off setting for light switch (CRFL)
Nova controller enhancements
Adjust header height to match Nova wall controller.
Support power monitoring in demo mode.
Remove hot water mock up button in demo mode
Bug fixes
Fix screen link system LED checkbox not auto scrolling in Android device.
Fix layout size for some small screen Android devices.
Make UDP scan refresh every time when link a new system.
Other bug and typo fixes