iZone Smart Light CL5## -User Guide
Product Overview
Thank you for choosing the iZone Smart Light - a smart RGBW LED Light that brings control, color, and convenience into your home. Paired via the iZone Hub, your lights can display over 16 million colors shades, 100 shades of white, and 11+ dynamic lighting effects, giving you total control over ambiance and energy efficiency. Whether you are setting the mood, saving energy, or automating your daily routines, iZone lighting gives you full control at your fingertips.
Key Features
Ultimate Color Control: Select from 16 million color shades and 100 tones of white to match any mood or activity.
Energy Efficiency: Consumes up to 80% less energy than standard light globes.
Longevity: Engineered to last up to 40,000 hours, featuring a built-in thermostat that protects internal electronics.
App Control: Control your lighting from your house or remotely using the iZone Home App, available on smartphones, tablets, or through the iZone Controller.
Flexible Grouping: Manage lights individually or group up to 256 units together for seamless control across rooms or zones.
Physical Control: Can also be operated via an iZone Wireless Smart Switch for quick manual access.
Security and Scheduling: Activate Holiday Mode to simulate occupancy and set automated schedules for your lights to turn on or off at specific times.
Circadian and Wake-Up Lighting: Mimic natural sunlight with gradual light intensity changes to help you wake up or wind down naturally.
Pairing Instructions
An iZone Hub or iLight Bridge is required to connect and control the iZone Smart Light through the iZone Home App or Wall Controller
Open the App:
Launch the iZone Home App and navigate to the Menu (bottom right icon).Select Devices:
Tap Devices, then select Add Device (+).Choose Category:
Select Lights → RGB Light.Preparation:
Ensure the light is correctly installed and powered.
Cycle the light’s power to enter pairing mode.
The light will flash red, indicating it is factory reset and ready to pair.
Tick the checkbox confirming “Light is flashing red.”
Start Pairing:
Tap Pair and wait for the connection process to complete.Successful Pairing:
Once paired, a confirmation message will display: “Light has been paired successfully.”Configuration:
Select Config the light to name your device and assign it to a room or group.
You may rename it (e.g., Hallway) and adjust other settings immediately or later under Category → Lights.
Please find the below video for pairing assistance:
Light Control Screen Overview
Control | Description |
|---|---|
Brightness Slider | Adjusts the light’s intensity. Slide left to dim or right to increase brightness (maximum value: 100). |
On/Off Button | Toggles the light on or off. |
Gear Icon | Opens the Light Settings menu. |
Pin Toggle | Pins or unpins the light from the home screen. |
Bright Tab | Access preset brightness modes: Mood, Night, and Bright. |
Whites Tab | Adjust the white color temperature (100 shades available). |
Colour Tab | Select colors from the 16 million color spectrum. |
Effects Tab | Apply dynamic lighting effects. |
Whites Tab
Use the selector ring to choose from a range of white tones:
Cool Whites (Light Blue/Teal end): Suitable for concentration and work environments.
Warm Whites (Ivory/Yellow end): Ideal for relaxation and cozy atmospheres.
Colour Tab
Select any hue from the 16 million available color shades using the on-screen color wheel. This allows precise customization of the room’s lighting mood and tone.
Effects Tab
Choose from pre-programmed dynamic lighting effects designed for various environments and activities.
Effect | Description |
|---|---|
Wake | Gradually increases/decreases brightness and color temperature when turned On/Off. Tap to change to different modes. |
Slow | Smooth, gradual color or brightness transitions, ideal for relaxation or evening use. Tap to change to different modes. |
Medium | Balanced transition speed suitable for everyday lighting effects. Tap to change to different modes. |
Fast | Rapid, energetic color or brightness transitions, this is the default setting. Tap to change to different modes. |
Reading | Comfortable brightness and tone for reading. |
Relaxing | Soft, calming illumination for relaxation. |
Candle Light | Simulates the gentle flicker of a candle flame. |
Rotate | Gradually cycles through all color options. |
Holiday | Activates lighting patterns for occupancy simulation. |
Music | Synchronizes lighting changes with music. |
Circadian | Automatically adjusts brightness and color temperature throughout the day. |
Fun | Engages playful, dynamic lighting. |
Light Settings
Accessible via the Gear Icon on the control screen. This menu allows customization and technical configuration of your iZone Smart Light.
Feature | Default / Example Value | Description |
|---|---|---|
Light | Light | Editable name of the device. |
Type | RGBW LED | Light type. |
Room | No Room | Assigns the light to a room or area. |
Group | LG24 | Assigns the light to a specific group or wireless switch for unified control. |
Hub | — | Displays the hub to which the light is connected. |
Enable for All Off | On (Blue) | Includes this light when an “All Off” command is executed. |
Enable for All On | On (Blue) | Includes this light when an “All On” command is executed. |
Wall Switch | — | Configures behavior when controlled via a wireless smart switch. |
Power On | — | Determines behavior after a power outage (see next section). |
iSense | Off (Grey) | Automatically turns lights off when no motion is detected via the smart switch. |
Adaptive Brightness | Off (Grey) | Adjusts brightness based on ambient light via the smart switch (cannot be combined with iSense). |
Delete Device | Red Text | Permanently removes the light from the iZone system. |
Power On Settings
Accessible under Light Settings → Power On.
This setting controls the light’s behavior after power is restored or when a physical switch is used.
Setting | Description |
|---|---|
Use Global Set | Applies the default Power On setting configured for your iZone system. |
No Change | The light resumes its previous state (on/off and color) before power loss. |
Turn On | The light always turns on using its last brightness and color setting. |
Turn On White | The light turns on in a default white tone when power is restored. |
Safety and Maintenance
Installation must be performed by a qualified electrician.
Do not disassemble or modify the product.
Avoid exposure to excessive moisture or heat.
Use only with compatible iZone Hubs, Controllers, and Switches.
Troubleshooting and Support
If your light does not appear in the app or fails to pair:
Ensure the iZone Hub or iLight Bridge is online and connected to your network.
Confirm the Light is receiving power and flashing red during pairing.
Update the iZone Home App to the latest version.
For further queries or technical assistance, please contact the iZone Support Team at supportdesk@izone.com.au