CVRFH: VRF Host Module

The iZone VRF AC Host Module (CVRFH) will eliminate the need for an iZone CPU module and smart hub for every indoor unit, which results in a cost-effective climate control solution. Install a single iZone 8-zone CPU module on one of the indoor units, then install a VRF AC Host Module and AC unit module on every subsequent indoor unit and connect them together with a CAT5 cable.

Features

• Pin indoor AC fan coil units as a device/zone on the Nova home screen

• Customise the home screen to easily control every indoor unit and zone

• Add schedules/scenes to suit your needs

• Control system remotely from your mobile phone

• Connect up to 16x indoor units to a single VRV outdoor system

• Connect up to 5x outdoor systems to a single Nova controller

• Connect up to 8x Nova controllers on the same network with no additional hardware modules required

• Step-by-step onscreen installation wizard to set up and configure system

Brochure

Download here

Wiring Diagram

Example Daikin VRV System:

This diagram shows a typical Daikin VRV system with a single outdoor unit and 3 indoor units. One of the indoor units are zoned and the others are individually controlled.

Open

VRV Daikin System

iZone parts needed:

Example ME VRF System:

This diagram shows a typical ME VRV system with a single outdoor unit and 3 indoor units. One of the indoor units are zoned and the others are individually controlled.

Open

ME VRF System

Open

Example of ME dipswitch to switch set zone control temperature sensors mode.

iZone parts needed:

Specifications