CUCM: Universal Module - Install Guide
PAGE CONTENTS
PHOTO & DESCRIPTION
The CUCM is an interface module that is used to connect equipment such as AC units, Ducted gas heaters and Outside air ventilation system to an iZone system
RJ 45 ports: 2 x 1Zone network ports for connection to C225 and one spare
Wiring terminals: Wiring terminals see different configurations for each application
SPECIFICATIONS
Model Number | CUCM, CUCMK |
Power Supply | Via RJ45 from C225 |
Casing material | Fire retardant ABS plastic |
Operating Temperature | Up to 65oC |
Rating | 24 V ~ 0.5A |
Communications protocols | CAN Bus - Wired |
Cable included - CUCMK Only | CFC1S (CAT5E) |
O/A Dimensions | Height 32 mm Width 119 mm Length 105 mm |
Weight (Excludes power supply) | 160 g |
Connect cables as shown on the wiring diagram for the respective option. (24V maximum)
Configure the correct system type on the touch screen
Configure the Run on timer, anti-cycle timer, 2nd stage offset, 2nd stage delay and fan control on the touch screen, as applicable
Test for correct operation
