User Guide- iZone Video Doorbell (CVD)
PAGE CONTENTS
Product Overview
The iZone Video Doorbell notifies you when someone rings your doorbell. You can see and speak with guests through your iZone Home mobile app on the phone. If you're unavailable, the doorbell can automatically play a pre-recorded message and allow your guest to leave a voice message. This guide will help you install, set up, and use your device effectively.
Installation & Setup Guide
Power On the Doorbell
Plug in or connect power to the video doorbell.
Wait for the device to announce: “System startup, waiting for connection.”
Open the App & Add Device
In the iZone Home app or the Nova wall controller, go to:
Menu → Devices → Add Device (top right corner) → Security → Video Doorbell
Begin Setup
Tap Next to begin installation.
Enter Wi-Fi Details
Enter your Wi-Fi name (SSID) and Password.
The doorbell only supports 2.4 GHz Wi-Fi networks. Both SSID and Password are case sensitive.
Scan QR Code
Tap Next after entering Wi-Fi details.
A QR code will appear in the app.
Hold your phone in front of the doorbell’s camera and follow the in-app guide.
Connect to Wi-Fi
You will hear: “Wi-Fi is connecting.”
Tap the “Heard Wi-Fi is connecting” button in the app.
Wait for: “Wi-Fi connection successful.”
Finish Setup
Tap Done in the app. Your video doorbell is now ready to use!
Please find the below video for pairing assistance:
Troubleshooting & Reset
Incorrect Wi-Fi details or failed connection (when doorbell says “WiFi connection timeout”) requires restarting the setup.
To Reset the Doorbell:
Press the reset button on the back of the device for 10 seconds.
The doorbell will say:
“System reset”
“System startup”
“Waiting for connection”
Begin setup again from Step 2.
Security Feature
Tap on Category -> Security -> to reach to the Security main menu:
Tap on system to get into the Home and Away options- You can toggle between Home and Armed modes for tailored notifications:
Security Status Icon Descriptors
Status | Icon |
Armed |  Red Shield
|
Home |  Green Sofa
|
Pin
Pin the security system shortcut to the home screen.
Faces (Facial Recognition)
Identifies people when system is armed.
Known faces are recognized.
Unknown faces may trigger alerts.
Home vs. Away Modes
Mode | Description |
Home Mode | Only doorbell rings trigger notifications |
Away Mode | All motion and human detection alerts are active |
Video Doorbell Menu and Icon Descriptors
Tap on the Video Doorbell to get into the Doorbell page from security -> then tap on settings icon on the top right corner to get into the Doorbell Settings.
Live View Menu Overview
Icon | Description |
 | Return to the previous screen |
Device Name | Shows the current camera feed source |
| Opens camera settings |
Camera Feed Section
Live: Indicates live stream is active
Pin Toggle: Pin or unpin the camera to the home screen
Timestamp Overlay: Displays current date, time, and time zone
Recording Options
Icon | Function |
 Record | Start/stop recording manually |
 Snapshot
| Take a still photo of the live feed |
🔴 Red record icon = Recording is active. Tap again to stop before exiting the screen.
Action Buttons
Icon | Function |
 Siren
| Activates loud siren for security alerts |
 Talk
| Enables two-way audio with visitors |
When someone rings, the Talk button also lets you answer/hang up.
Video Doorbell Settings Page
Setting | Description |
Name | Rename the device |
Category | Shows device type (Security) |
Type | Device type (Video Doorbell) |
Room | Assign device to a room |
Pin to Home Screen | Show shortcut on main screen |
SD Card | View capacity or status (None if not installed) |
Firmware | View current version and updates |
Hub | View or change connected hub |
Notification | Turn push alerts on/off |
Speaker Volume | Adjust speaker output (0–100%) |
Sensitivity | Motion detection: Low / Normal / High |
Star Light | Enable night vision mode |
Auto LED | Let the doorbell manage its LED automatically |
LED On | Manually turn LED on or off |
WDR | Wide Dynamic Range for better image quality |
Orientation | Adjust camera rotation |
Extra Control Button | Set up another device trigger within the doorbell live page (e.g. a light button to turn a light on/off if available) |
Restart Camera | Reboot the doorbell |
Motion Sensitivity Guide
Setting | Action |
Low | Detects only large/close motion (fewer false alerts) |
Normal | Balanced sensitivity |
High | Detects small/distant movement |
Receiving and Answering a Video Doorbell Call
When someone presses the doorbell, you will receive a notification on your Nova Wall Controller along with a ringing sound.
Tap the notification to answer the call.
To end the call, tap the Talk button again.
On Android Devices:
When someone presses the doorbell, you will receive an app notification similar to the Nova wall controller. Tap the notification to answer the doorbell call.On iPhones (iOS Devices):
The doorbell will appear as a regular incoming call. Answer the call as you normally would.
To view the live video feed, tap on more option and click open in iZone Home option during the call to open it and watch the live stream while speaking.
Please refer to the video below for a visual demonstration.
Additional Useful Information:
Voice Messages
Stored on SD card (if inserted)
In newer iZone home app version: Menu → Notifications and Security
Event History
Motion-detected footage is saved to SD card.
Snapshot previews are stored in the cloud for 7 days.
Cloud snapshots auto-delete; manual delete not supported at the moment.
Snapshots can be viewed from: Menu → Notifications and Security
SD Card Recommendations
Capacity | Approx. Recording Time |
16 GB | 1 day |
64 GB | 1 week |
Use a high-speed SD card. A yellow triangle = Invalid/Incompatible card
Night-Time Detection
PIR Sensor activates starlight at night
Recording is triggered based on the following factors:
a. Proximity
b. Movement speed
c. Human detection
Red Lights on Camera
These are infrared (IR) LEDs for night vision.
They glow visibly in dark conditions.
Face Recognition Notes
Works only when human movement is detected
Does not block recording
To receive all motion alerts, including non-human, use Custom Recipe in the app.
Notifications & Doorbell Calls
Disabling notifications stops push alerts.
Doorbell calls will still ring through.
Need Further Help?
If you encounter issues not covered in this manual, contact us via supportdesk@izone.com.au or contact customer support via 0865 566 415.