Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 3 Next »

C325L2: LG

LG Compatibility: AWY-7G6 Series

Can use RA, Zones, Master or RF as controlling sensor

Polarity is not critical

  • Connect the LG supplied cable from the fan coil unit to the iZone C225 module Only use the black and yellow cables

  1. Connect black and yellow wires only: Use the connector supplied with the LG unit to connect from the fan coil to the iZone C225. Only connect the black and yellow cables to the C225. Polarity is not critical

  2. LG control cable: Connect black and yellow cables only.

  3. Red cable not used: Red cable is not required for iZone connection

C325M2: MITSUBISHI ELECTRIC

Mitsubishi Electric Compatibility:

PE-M##GAA

New MR Slim series (Must be C325M2)

C320M & C325M have been superseded by C325M2

Can use RA, Zones, Master or RF as controlling sensor

Polarity is not critical

  • Take  the Remote Controller (A / B) control wire from the fan coil unit and connect it to the AC Unit Control Cable on the  C225 / C325M2

  1. Connect to A / B terminals: Connect wires to to A and B terminals. Polarity is not critical

  2. Mitsubishi Electric FCU PCB

  3. C225: iZone C225 module with C325M2 AC unit module connected

  4. Shielded, 2 Core, twisted pair: This cable is not provided by iZone

  • No labels