Apple HomeKit - Install Guide

For compatibility with Apple HomeKit: A new iZone Wi-Fi Bridge (COCB) is required. Make sure the bridge is connected to the same Wi-Fi network as your iPhone or other Apple devices

Name the devices, zone names etc: So they are easy to pronounce. If possible avoid avoid using number and symbols in the names

For a better Siri Home experience use Siri's jargon: The device / zone names we have used is highlighted in yellow. You would need to substitute these names with those on your system

1️⃣ Open iZone Worldwide: Open your iZone App and navigate to the Worldwide login

2️⃣ Manage device: Login using your user name and password then navigate to Device>Manage Device

3️⃣ Home Kit Code: You will see details of your Devices. Select which device you want to pair to Apple Homekit and record the Homekit Code for use later

4️⃣ Start: Scroll down to Homekit Pair and press Start. This will enable the iZone to be discovered by Homekit

5️⃣ Open the Apple Home App on you iPhone or iPad

6️⃣ Click on Add Accessory On the home page click on Add Accessory or the + symbol in the top right corner of the screen

7️⃣ Click on "Don't Have a Code or Can't Scan?": Go down to Don't Have a Code or Can't Scan? and press the text

8️⃣ iZone should appear in Nearby Accessories: The screen will display all Nearby Accessories. If everything is configured correctly an iZone Home will appear here. Press the icon to start the paring process

9️⃣ Enter Code: Input the 8-digits HomeKit set-up code you recorded earlier from iZone Worldwide. (See 3 above)

1️⃣ 0️⃣ Wait for Homekit to finish pairing: Wait a few moments for Homekit to complete the pairing process and populate the iZone devices