Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

C325A: ACTRON

Actron Compatibility: Ultra Slim \ low profile series only

LRE-071AS / URC-071AS ( 7kW )

LRE-100AS / URC-100AS ( 10kW )

LRE-130AS / URC-140AS (14kW )

Can use RA, Zones, Master and RF as controlling sensor

Polarity is critical see below, for correct connection

  • Connect a shielded, 2 core, twisted pair control cable from the  C225 / C325A to the  X / Y in the fan coil unit. This cable and connector is supplied by iZone - CACUCM15

  1. Indoor fan coil unit PCB

  2. CN40: Connect to X and Y

  3. C225 AC unit connector: Connect AC unit cable from fan coil to C225 as indicated

  4. Polarity is critical: Make sure it is wired in accordance with these instructions on both the CN40 connector on the fan coil PCB and the C225 cable connector

  5. Cable from CN40: Ensure the cable is shielded, 2 core, twisted pair. This cable is pre-terminated suitable for CN40 connector and is supplied by iZone

  • No labels