Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Panel
panelIconIdatlassian-info
panelIcon:info:
bgColor#B3D4FF

Panasonic Compatibility:

Panel
panelIconIdatlassian-note
panelIcon:note:
bgColor#C0B6F2

Current Firmware Version - 1.6

SERIES & kW

INDOOR

OUTDOOR

S - series  units

 

 

Nano X high static ducted

 

 

Panel
panelIconIdatlassian-note
panelIcon:note:
bgColor#C0B6F2
Current Firmware Version - 1.6

Panel
panelIconIdatlassian-check_mark
panelIcon:check_mark:
bgColor#ABF5D1

Can use RA, Zones, Master or RF as controlling sensor

Panel
panelIconIdatlassian-check_mark
panelIcon:check_mark:
bgColor#ABF5D1

Polarity is not critical

  • Take  the R1 / R2 control wire from the fan coil unit  and connect it to the AC Unit Control Cable on the  C225 / C325P2

1️⃣ C225 Module: Ensure a C325P / C325P2 module is connected to the C225 module

2️⃣ Connect R1 / R2 wires here: Use a shielded, 2 core, twisted pair cable from the FCU to the C225 module