C325P2 - Panasonic 2
Panasonic Compatibility:
Current Firmware Version - 1.6
SERIES & kW | INDOOR | OUTDOOR |
S - series units |
|
|
Nano X high static ducted |
|
|
Can use RA, Zones, Master or RF as controlling sensor
The Nanoe X ON THE Panasonic Unit is always on by default and operates when the Fan is initiated.it can be turned off is through the Panasonic Controller
Polarity is not critical
Take the R1 / R2 control wire from the fan coil unit and connect it to the AC Unit Control Cable on the C225 / C325P2
C225 Module: Ensure a C325P / C325P2 module is connected to the C225 module
Connect R1 / R2 wires here: Use a shielded, 2 core, twisted pair cable from the FCU to the C225 module