C325HS - Hisense
Hisense Compatibility:
Current Firmware Version - 1.0
Minimum firmware requirements
C225 v3.67
COCBH v4.27
Nova and Nova Mini v1.9
CCTSS v2.26
CCTSL v2.31
SERIES & kW | INDOOR | OUTDOOR |
High Static Pressure - 8.5 to 16 Kw Series | AUD - ###UX4RSH1 | AUW - ### U4RK1 |
Can use RA, Zones, Master or RF as controlling sensor
Polarity IS critical see below, for correct connection
Do NOT connect the cable to iZone CPU, use the connection ports on C325 module.
X970 connection and iZone Supplied Cable
Connect a 2 core + earth, twisted pair control cable from the C325HS to the wired X970 port on the fan coil unit. This cable is supplied by iZone - CACUM15X970
X970 connection and Hisense Supplied Cable
If iZone supplied cable is not available for any reason and you are using the Hisense supplied remote controller cable (always recommended to use the iZone cable that comes with the kit), please use the following guideline to connect the AC indoor board to iZone AC unit module:
G = Black wire
Vcc = Red wire (DO NOT USE THIS WIRE)
T = White wire
R = Yellow wire
Hisense supplied cable in use