...
| Panel | ||||||
|---|---|---|---|---|---|---|
| ||||||
WIRING DIAGRAM - C110WC |
| Panel | ||||||
|---|---|---|---|---|---|---|
| ||||||
INSTALL INSTRUCTIONS |
1️⃣ The C110MC can be installed on top of the indoor fan coil unit
...
| Panel | ||||||
|---|---|---|---|---|---|---|
| ||||||
INITIALISE INSTRUCTIONS |
All new or modified systems must be initialised prior to system configuration
To initialise the system press the button on the underside of any wall controller. This button is recessed so you will need to use a pen to press the button
The time to initialise the system will vary depending on the number of motors connected
The system will also initialise when power is restored after a power failure
...
| Panel | ||||||
|---|---|---|---|---|---|---|
| ||||||
CONFIGURATION INSTRUCTIONS |
| Panel | ||||||
|---|---|---|---|---|---|---|
| ||||||
Only qualified iZone 110 installers should configure the iZone 110 System Incorrect configuration could result in damage to your air conditioning unit and system |
...
| Panel | ||||||
|---|---|---|---|---|---|---|
| ||||||
TESTING AND LABELLING |
1️⃣ Set the AC unit fan speed to high and close all zones, now open one zone at a time and check which room the air is being supplied to
...