...
| Panel | ||||||
|---|---|---|---|---|---|---|
| ||||||
PAIRING - VIA iZONE HOME APP |
1️⃣ Switch the power on to the iZone Irrigation Controller
...
4️⃣ You are now ready to configure, name and control the watering stations on your App
See our user guide here for configuring your iZone irrigation controller
5️⃣ If you would like to control your iZone Irrigation controller when you are away from home you will need to register for our world-wide service
See our guide here for registering for the world-wide service - iZone Worldwide - Install Guide
| Panel | ||||||
|---|---|---|---|---|---|---|
| ||||||
If required, install and pair repeaters as required to ensure full and reliable control of your iZone Irrigation Controllers |
| Panel | ||||||
|---|---|---|---|---|---|---|
| ||||||
INSTALLATION - VIA iZONE TOUCHSCREEN |
SMART HUB
1️⃣ Connect the Smart Hub to your computer network via an Ethernet port
See our guide here for installing the Smart Hub - COCB - Smart Hub - Install Guide
2️⃣ Plug the Smart Hub into a power outlet, switch the power outlet on
| Panel | ||||||
|---|---|---|---|---|---|---|
| ||||||
It is recommended that the Smart Hub is located in the centre of the building and as high as possible to maximise the range |
iZONE IRRIGATION CONTROLLER
1️⃣ Remove the iZone Irrigation system from its packaging and mount it on the wall using the two mounting holes
2️⃣ Wire the solenoid valves and pump / master valve (if used) as per the wiring diagram
3️⃣ If using an iZone Irrigation transformer, install it by removing the mounting bracket and installing the transformer as shown below
4️⃣ Wire the 24V and common into the terminals as per the wiring diagram
| Panel | ||||||
|---|---|---|---|---|---|---|
| ||||||
Check all connections to ensure they are wired correctly and are secure |
INSTALL DIAGRAM
| Expand |
|---|
 |
| Panel | ||||||
|---|---|---|---|---|---|---|
| ||||||
PAIRING - VIA iZONE TOUCHSCREEN |
1️⃣ Switch the power on to the iZone Irrigation Controller
2️⃣ Press the pair button on the iZone Irrigation controller and at the same time press the pair button on the iZone touchscreen
| Panel | ||||||
|---|---|---|---|---|---|---|
| ||||||
The blue Pair LED will flash blue rapidly while the iZone Irrigation pairs to the Smart Hub |
3️⃣ If you have more than 8 stations you will require additional iZone Irrigation modules to control stations 9 to16 and 17 to 24
Set the station range selector switch to the appropriate position and pair the additional iZone Irrigation modules as per above
4️⃣ You are now ready to configure, name and control the watering stations on your touchscreen
See our user guide here for configuring your iZone irrigation controller
...
See our guide here for registering for the world-wide service - iZone Worldwide - Install Guide
| Panel | ||||||
|---|---|---|---|---|---|---|
| ||||||
If required, install and pair repeaters as required to ensure full and reliable control of your iZone Irrigation Controllers |