| Panel | ||||||
|---|---|---|---|---|---|---|
| Panel | ||||||
| ||||||
C325HI: HAIER | ||||||
| ||||||
Haier Compatibility: ADH series only |
| Panel | ||||||
|---|---|---|---|---|---|---|
| ||||||
Can use RA, as controlling sensor |
...
| Panel | ||||||
|---|---|---|---|---|---|---|
| ||||||
Requires Haier Interface board YCJ-A002 |
Connect a shielded, 2 core, twisted pair control cable from the C225 / C325HI to the A / B terminals on the Haier Interface board YCJ-A002.
Connect the interconnecting cable supplied by Haier to CN24 in the fan coil unit of the Haier Interface board YCJ-A002.
Set the dipswitches as shown below. Polarity is critical.
Haier YR-E17 wired RC must be connected and set to run on return air
...