Page Comparison

The COCB CL5B is a wireless or wired open connection bridge that connects the iZone air conditioning and Home Automation lighting systems to the home Wi-Fi to enable the control of iZone systems via a smart phone, tablet or voice activation via a 3rd party device

Image Removed

Image Added

1️⃣ Antenna: RF 433MHz antenna. For wireless communication with C225 and wireless iZone devices

2️⃣ Reset button: To reset the COCB press this button.

3️⃣ iZone World Wide LED: This LED indicates that the bridge is communicating with the iZone World Wide Server

4️⃣ Pairing LED: This LED will flash when the COCB is in the process of pairing to the system

5️⃣ Pair button: Press this button to pair the COCB to the system

6️⃣ Wall mounting point on back: A hanging bracket is incorporated on the back of the COCB to enable the device to be hung from a single point on a wall or similar

7️⃣ Ethernet activity LED: This LED indicates the COCB is connected to a network and is communicating

8️⃣ Wireless LED: This LED indicates RF 433MHz wireless communication with wireless devices. If the COCB is hard wired to the C225 via the CGB2C35 cable it will indicate CAN communication with the C225

9️⃣ Rubber feet for desk top mounting: 4 small rubber feet are installed for mounting on a desk similar

1️⃣ 0️⃣ Power jack Port: The COCB power adaptor is connected here

1️⃣ 1️⃣ Ethernet RJ45 Port: Connect a CAT5 cable from the home Wi-Fi router (LAN) or network to this Ethernet port on the COCB

1️⃣ 2️⃣ iZone Net Port: If a wired connection between the C225 module and this bridge is required, a special cable (CGB2C35) is used to connect the C225 module and the COCB bridge via this iZone Net Port iZone Net Port: If a wired connection between the C225 module and this bridge is required a special cable (CGB2C35) is used to connect the C225 module and the bridge via this iZone Net Port

2️⃣ Pair button: The pair button is used to pair the CL5B to the C225 system

3️⃣ Ethernet port: Connect the CL5B to the customers modem via this Ethernet port

4️⃣ 433 MHz wireless antenna: For wireless communication with C225 and wireless iZone devices

5️⃣ Ethernet activity LED: The LED is on, when connected to a Wi-Fi network, or off when not connected to a Wi-Fi network

6️⃣ Activity LED: Indicates activity on both interfaces, Ethernet and iZone Net (RF or CAN)

7️⃣ C225 Activity: The LED is on, when connected to a C225 module, or off when not connected to a C225 module