Panel | ||||||
---|---|---|---|---|---|---|
| ||||||
Panasonic Compatibility: S - series units Nano X high static ducted units requires C325P2 |
Panel | |||||||||
---|---|---|---|---|---|---|---|---|---|
| C320P & C325P have been superseded by C325P2
| ||||||||
Current Firmware Version - 1.6 |
SERIES & kW | INDOOR | OUTDOOR |
S - series units |
|
|
Nano X high static ducted |
|
|
Panel | ||||||
---|---|---|---|---|---|---|
| ||||||
Can use RA, Zones, Master or RF as controlling sensor |
Panel | ||||||
---|---|---|---|---|---|---|
| ||||||
Polarity is not critical |
Take the R1 / R2 control wire from the fan coil unit and connect it to the AC Unit Control Cable on the C225 / C325P2
1️⃣ C225 Module: Ensure a C325P / C325P2 module is connected to the C225 module
2️⃣ Connect R1 / R2 wires here: Use a shielded, 2 core, twisted pair cable from the FCU to the C225 module