| Panel | ||||||
|---|---|---|---|---|---|---|
| Panel | ||||||
| ||||||
Haier Compatibility: | ||||||
| ||||||
Current Firmware Version - 1.3 |
CODE | SENSOR TYPE | CONNECTION |
C325HI v1. |
3 | RA |
ONLY | A-B-C / Polarity Critical | |
SERIES & kW | INDOOR | OUTDOOR |
AD100HN5FA-SET
10kW High Static Single Phase
AD100S2SH5FA
1U100S2SN5FA
AD125HP5FA-SET
12.5kW High Static Single Phase
AD125S2SH5FA
1U125S2SP5FA
AD125HN5FA-SET
12.5kW High Static Single Phase
AD125S2SH5FA
1U125S2SP5FA
AD140HP5FA-SET
14kW High Static Single Phase
AD140S2SH5FA
1U140S2SP5FA
AD160HP5FA-SET
15.5kW High Static Single Phase
AD160S2SH5FA
1U160S2SP5FA
...
| panelIconId | atlassian-cross_mark |
|---|---|
| panelIcon | :cross_mark: |
| bgColor | #FFBDAD |
...
ADH Series only |
| Note |
|---|
Can do Return Air ONLY - NOT Zones, Master or RF as controlling sensor, RA ONLY. |
| Panel | ||||||
|---|---|---|---|---|---|---|
| ||||||
Polarity is critical see below, for correct connection |
| Panel | ||||||
|---|---|---|---|---|---|---|
| ||||||
Requires Haier proprietary controller for setup - YRE-27 |
| Panel | |
|---|---|
| atlassian-warning | |
| panelIcon | :warning: |
| bgColor | #FFF0B3 |
Requires Haier Interface board YCJ-A002 |
Connect a shielded, 2 core, twisted pair control cable from
...
the C225 / C325HI to the A / B terminals on the Haier Interface board YCJ-A002.
...
Connect the interconnecting cable supplied by Haier to CN24 in the fan coil unit of the Haier Interface board YCJ-A002.
Set the dipswitches as shown below
...
.
Haier
...
Interface board YCJ-A002
...