C325F2 - Fujitsu 2

Fujitsu Compatibility:

SERIES & kW	INDOOR	OUTDOOR
ARTG Series Wiring: Connect AC control cable to 2 and 3 - Polarity IS Critical
High Static Single Phase - Compact Outdoor	ARTG30LHTA ARTG36LHTA ARTG45LHTA
High Static Single Phase	ARTG30LHTA ARTG36LHTA ARTG45LHTA ARTG54LHTC
High Static Infinity Range - Single Phase ONLY	ARTG45LDTA (single phase) ARTG54LDTA (single phase) ARTG60LDTA (single phase)
High Static Three Phase	ARTC72LATU ARTC90LATU
ARTH Series Wiring: Connect AC control cable to Y2-Y3 and SW1 dip switch ON - Polarity IS Critical
High Static Single Phase	ARTH60KHTA ( Single Phase )
Standard Range	ARTH54KHTA (Single phase)
High Efficiency	ARTH60KHTB (Single phase)

Current Firmware Version - 1.10

Can use RA, Zones, Master and RF as controlling sensor

Polarity is critical see below, for correct connection

Do NOT use the terminal 1 (12V) when connecting to an iZone system

Connect a shielded, 2 core, twisted pair control cable from the C225 / C325F2 to the 2 & 3 terminals in the Fujitsu FCU

1️⃣ iZone C225 module: Ensure the correct C325 module is connected for the AC unit make it is controlling

2️⃣ 2 / 3: Connect the 2 /3 cable from the Fujitsu FCU to here. Polarity is critical

3️⃣ Shielded cable: Shielded, 2 core, twisted pair cable must be used and is not supplied by iZone

Fujitsu Compatibility:

ARTH60LHTA - ARTH60LHTB - ARTH54LHTA

Can use RA, Zones, Master and RF as controlling sensor

Polarity is critical see below, for correct connection

Do NOT use the terminal Y1 (12V) when connecting to an iZone system

Connect a shielded, 2 core, twisted pair control cable from the C225 / C325F2 to the Y2 & Y3 terminals in the Fujitsu FCU

1️⃣ iZone C225 module: Ensure the correct C325 module is connected for the AC unit make it is controlling

2️⃣ Y2 / Y3: Connect the Y2 / Y3 cable from the Fujitsu FCU to iZone CPU. Polarity is critical

3️⃣ Shielded cable: Shielded, 2 core, twisted pair cable must be used and is not supplied by iZone