Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 3

INSTALLATION

TROUBLESHOOTING

USER GUIDE

PAGE CONTENTS

PHOTO & DESCRIPTION

The iZone basic LED down lights is a low cost "dumb" LED

If used in conjunction with and iZone LED Dimmer module or iZone LED Dimmer + Switch module it can be controlled via your iZone system

The colour temperate can be altered by a three position dip switch on the top of transformer casing

1️⃣ Plastic Facia: Only available in white

2️⃣ Spring clips: Strong spring clips with rubber boots

3️⃣ Diffuser: Plastic diffuser

4️⃣ Composite body: The body is a composite of metal and plastic

5️⃣ Transformer: The transformer is built into the LED body

SPECIFICATIONS

Model numbers

CLIGHT

Certification

AS/NZS 60598.2.2;  C Tick, SAA, CE, IP44;  IC-4

Power supply

Input: 220 - 240VAC ~ 50/60Hz

Connection

2 Pin Australian GPO plug

Transformer

Built in

Power lead

0.6 meters

Power consumption

Maximum  10.0 Watts on full brightness (4000K)

 

Brightness

Maximum 794 Lumens

Colour adjustable

Cool (6000K)

Neutral (4000K)

Warm (3000K)

(Manual control via dip switch on the top of the down light)

Efficiency

80 Lumens / Watt (Cool White)

Beam Angle

120

Dimmable / controllable

Yes - fully compatible with iZone Relay, Dimmer and Dimmer + switch  module (CACR, CACD & CADSW)

Operating Temperature

-20oC to +50oC

Environment

IP44 rated

Suitable for indoor use only. Suitable for alfresco, porch and bathroom use.

Rating

 

Suitable for residential or commercial use in Australia and New Zealand. Used where air transfer is not permitted or not desired between living space and roof space (there will be no air transfer between spaces even if there is no insulation covering the luminaire). These luminaires have been tested to 90oC and will automatically reduce in brightness to prevent over temperature.

Size & Weight

Height: 58 mm

Diameter 115 mm

Hole cut size: 90 mm

Weight 192 g

  • No labels