| Panel | ||||||
|---|---|---|---|---|---|---|
| ||||||
Fujitsu Compatibility: ARTG36LHTA - ARTG45LHTA - ARTG60LHTA - ARTG60LDTA |
| Panel | ||||||
|---|---|---|---|---|---|---|
| ||||||
C320F & C325F have been superseded by C325F2 |
...
| Panel | ||||||
|---|---|---|---|---|---|---|
| ||||||
Do not NOT use the terminal 1 (12V) when connecting to an iZone system |
...
3️⃣ Shielded cable: Shielded, 2 core, twisted pair cable must be used and is not supplied by iZone
| Panel | ||||||
|---|---|---|---|---|---|---|
| ||||||
Fujitsu Compatibility: ARTH60LHTA - ARTH60LHTB - ARTH |
| Panel | ||||||
|---|---|---|---|---|---|---|
| ||||||
Can use RA, Zones, Master and RF as controlling sensor |
| Panel | ||||||
|---|---|---|---|---|---|---|
| ||||||
Polarity is critical see below, for correct connection |
| Panel | ||||||
|---|---|---|---|---|---|---|
| ||||||
Do NOT use the terminal Y1 (12V) when connecting to an iZone system |
Connect a shielded, 2 core, twisted pair control cable from the C225 / C325F2 to the Y2 & Y3 terminals in the Fujitsu FCU
...
Set this DIP switch (SW1) into the UP position
...