Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 5 Next »

PAGE CONTENTS

PHOTO & DESCRIPTION

The CEPC is a wireless controller / sensor for iZone 150, 155, 400, 405, and 415 systems. It can also be used as a wireless zone controller on any iZone system

1️⃣ E paper screen: Low power E paper screen

2️⃣ Front cover

3️⃣ Dial / Selector: Rotate the dial to move to the next icon. Press the dial to select the required item.

4️⃣ Back cover

5️⃣ Rubber feet: Rubber feet for use when not mounted on a wall

6️⃣ Mounting holes for wall plate: These holes receive the mounting legs on the wall mount. To hang the controller insert the mounting legs into the mounting holes on the back cover and then slide the controller down. To remove the controller from the wall mount > Slide the controller up then pull forward

7️⃣ Battery Cover: To access the batteries remove the Phillips screw on the battery cover and lift the cover off. 2 x AAA batteries are required

8️⃣ Reset Controller: To reset the controller simply remove and replace one of the batteries.

9️⃣ Wall mount not show: The wall mount is not shown in this image for clarity

SPECIFICATIONS

Model Number

CEPC

Power Supply

2 x AAA batteries

Screen orientation

Landscape Only

Screen graphic options

Naked Only

Communications Protocols

iZone 433Mhz proprietary wireless protocol

Operating Temperature

Room temperature

CEPC O/A Dimensions

Height 30 mm (Excludes wall bracket but includes dial)

Width 95 mm

Length 153 mm

Wall bracket Dimensions

Height 4 mm

Width 89 mm

Length 148 mm

Weight

164 g (Excludes wall bracket but includes batteries)

EXPLODED VIEW OF CEPC

WIRING DIAGRAM - iZONE 150 & 155

iZone 150 & 155 is an integrated air conditioning unit and zone controller that uses a E-paper screen (CEPC) for the graphic user interface

Zones can be temperature controlled by adding iZone sensors and an induct temperature sensor

The iZone 150 system does not include Wi-Fi control as it is supplied without a bridge

The iZone 155 is supplied with an iZone Bridge, the user can control the AC and zones via Wi-Fi from their smart phone or tablet. Other iZone automation products such as lighting, irrigation, garage door control etc can also be added and controlled

iZone 150 & 155 can be configured as 0-6 zones only

iZONE 150 WITH 0-6 ZONES

iZONE 155 WITH 0-6 ZONES

PAIRING THE CEPC TO C150

  • Remove the battery tab

  • Once in the Configuration section>Select System > Scroll down to Pair device > Select >

1️⃣ Select Pair Device: This is used to pair the CEPC to the system. Sensor and the bridge can be paired using the pair button on the home screen

2️⃣ Select to exit: To exit the System Config dial anti-clockwise to ≤ then press the dial to exit

  • No labels