PAGE CONTENTS
PHOTO & DESCRIPTION
The CEPC is a wireless controller / sensor for iZone 150, 155, 400, 405, and 415 systems. It can also be used as a wireless zone controller on any iZone system
1️⃣ E paper screen: Low power E paper screen
2️⃣ Front cover
3️⃣ Dial / Selector: Rotate the dial to move to the next icon. Press the dial to select the required item.
4️⃣ Back cover
5️⃣ Rubber feet: Rubber feet for use when not mounted on a wall
6️⃣ Mounting holes for wall plate: These holes receive the mounting legs on the wall mount. To hang the controller insert the mounting legs into the mounting holes on the back cover and then slide the controller down. To remove the controller from the wall mount > Slide the controller up then pull forward
7️⃣ Battery Cover: To access the batteries remove the Phillips screw on the battery cover and lift the cover off. 2 x AAA batteries are required
8️⃣ Reset Controller: To reset the controller simply remove and replace one of the batteries.
9️⃣ Wall mount not show: The wall mount is not shown in this image for clarity
SPECIFICATIONS
Model Number | CEPC |
Power Supply | 2 x AAA batteries |
Screen orientation | Landscape Only |
Screen graphic options | Naked Only |
Communications Protocols | iZone 433Mhz proprietary wireless protocol |
Operating Temperature | Room temperature |
CEPC O/A Dimensions | Height 30 mm (Excludes wall bracket but includes dial) Width 95 mm Length 153 mm |
Wall bracket Dimensions | Height 4 mm Width 89 mm Length 148 mm |
Weight | 164 g (Excludes wall bracket but includes batteries) |
EXPLODED VIEW OF CEPC
WIRING DIAGRAM - iZONE 150 & 155
iZone 150 & 155 is an integrated air conditioning unit and zone controller that uses a E-paper screen (CEPC) for the graphic user interface
Zones can be temperature controlled by adding iZone sensors and an induct temperature sensor
The iZone 150 system does not include Wi-Fi control as it is supplied without a bridge
The iZone 155 is supplied with an iZone Bridge, the user can control the AC and zones via Wi-Fi from their smart phone or tablet. Other iZone automation products such as lighting, irrigation, garage door control etc can also be added and controlled
iZone 150 & 155 can be configured as 0-6 zones only
iZONE 150 WITH 0-6 ZONES
iZONE 155 WITH 0-6 ZONES
PAIRING THE CEPC TO C150
Remove the battery tab
Once in the Configuration section>Select System > Scroll down to Pair device > Select >
1️⃣ Select Pair Device: This is used to pair the CEPC to the system. Sensor and the bridge can be paired using the pair button on the home screen
2️⃣ Select to exit: To exit the System Config dial anti-clockwise to ≤ then press the dial to exit