CEPC - Wireless Controller

The CEPC is a wireless controller / sensor for iZone 150, 155, 400, 405, and 415 systems. It can also be used as a wireless zone controller on any iZone system

1️⃣ E paper screen: Low power E paper screen

2️⃣ Front cover

3️⃣ Dial / Selector: Rotate the dial to move to the next icon. Press the dial to select the required item.

4️⃣ Back cover

5️⃣ Rubber feet: Rubber feet for use when not mounted on a wall

6️⃣ Mounting holes for wall plate: These holes receive the mounting legs on the wall mount. To hang the controller insert the mounting legs into the mounting holes on the back cover and then slide the controller down. To remove the controller from the wall mount > Slide the controller up then pull forward

7️⃣ Battery Cover: To access the batteries remove the Phillips screw on the battery cover and lift the cover off. 2 x AAA batteries are required

8️⃣ Reset Controller: To reset the controller simply remove and replace one of the batteries.

9️⃣ Wall mount not show: The wall mount is not shown in this image for clarity