C110: System Series - Installation Guide

Coming Soon!

1x C110MC: Basic CPU

1x CT24ACE: 24v Power Supply

1x CFC25S: 25m Cat5e Cable

1x C110WC: Push Button Controller

1x STICKERS: Room names for the push button controller

The C110MC can be installed close to the indoor fan coil unit

Do not run the cat5e cables alongside 240 Volt wiring

When installing network cables down wall cavities or chasing network cables into walls, tape up and protect the RJ45 connector to avoid damage to the connectors

Always install zones in consecutive ports starting at Zone number one (1)

Do not directly hard wire the CT24ACE into the AC unit’s power supply

Connect Zone Damper Actuators to the zone ports using the RJ12 cables as shown in the Wiring layout diagrams

Connect the C110WC to the iZone Net ports using the RJ45 cables

Only connect the power supply to the CT24ACE port after all components have been connected

Any existing or new air conditioning units that require modification or additional boards to facilitate the correct operation of the iZone system, is the responsibility of the installing contractor

Open