Release notes - iZone Home mobile

Owned by Wynand Kruger
Last updated: 28 Nov 2024 by Farzaneh Khosravi
5 min read

 

 

iZone Home 3.0.19 - Nov 2024

General Enhancements

  • Support for Mitsi AC 4-Speed Fan.

  • Warning icon added to indicate if CPU is not paired/dropped off during diagnosis.

  • Default bypass covered area set to unit capacity * 3m².

Nova Controller Enhancements

  • Fix for batch pair compact sensor causing COCB LED spinning issue.

  • Fix for advanced constant control cover area setting in bypass zone settings.

Bug Fixes

  • Fixed issue with C150 zone unable to select temperature sensor.

  • Corrected setpoint wheel rounding to 0.5-degree increments.

  • Fixed text overlap in setup wizard summary for zones type and area.

iZone Home 3.0.18 - Oct 2024

General enhancements

  • Support added for Hisense and Gree U-Match ducted AC unit.

  • Overheat Protection feature enabled/disabled for Daikin/Panasonic zoning systems.

  • Return Air control disabled for Brivis.

  • Display damper open percentage in AC settings under Zone Status list.

Nova controller enhancement

  • Select all text when editing zone name or room name.

  • Rapid Scan support added for setting AC unit brand.

  • Default bypass covered area set to 40% of the total zoned area.

  • Option for installers to set COCB to a static IP in hotspot mode.

  • Restrictions applied to installer accounts to prevent pairing or linking of video doorbells, cameras, Centurion garage doors, and Gainsborough door locks with the customer’s system.

Bug fixes

  • Fixed slow screen refresh when switching to home page.

  • Corrected sleep timer remaining time display issue.

  • Fixed error message display for login attempts with an empty password.

  • Various minor fixes and typo corrections.

iZone Home 3.0.17 - Sep 2024

General enhancements

  • Support AC unit brand based setpoint range

  • Changes to make white label interface easier.

Nova controller enhancement

  • Make homepage header time clickable, quick to Android time settings

  • Rapid Setup (QR Code) support VRF configurations

Bug fixes

  • Fix group setting page crash.

  • Remove ‘Sync from cloud’ option.

  • Add second room failed bug.

  • Expand zone area selection max to 255 m2.

  • Other bug and typo fixes

iZone Home 3.0.16 - Aug 2024

Show AC mode and set point in zone control screen

The AC mode and AC set point (for return air) is shown as a short cut on each zone control page.

image-20241007-014930.png

Include the ability to pair a zone temperature sensor to a constant zone

*Require firmware versions COCBH v4.28, C225/C150/C155 v3.67 and higher

Introduce a new zone type called a Constant with temp sensor. This allows an installer to pair a zone temperature sensor to a constant zone. This feature will be rolled out in later versions of the COCBH and CPU modules.

Display damper positions in zone settings

*Require firmware version COCBH v4.25 and higher

image-20241007-014731.png

Show red dot for AC no comms

The red dot on the home screen implies a) no comms between the Nova controller and smart hub OR b) no comms between the smart hub and CPU module. Check diagnostic settings to confirm.

Support AC VRF subsystems

Install an iZone VRF host module and show all fan coil units and zones on the home page.

Nova controller enhancements

  • New installer account interface:

    • Allow an installer to switch between his own linked AC unit and a homeowner’s system when onsite.

    • Add valid test link to check error code, fault history, test system in one page.

  • Auto detect Smart Hub (COCBH) when available on network (no need to open/close the app).

  • Show a list of available Wi-Fi SSIDs when trying to connect the smart hub (COCBH) to a WiFi network without a CAT5 cable.

  • After joining Wi-Fi hotspot, the Nova will connect to the same Wi-Fi automatically.

  • Provide installer with the ability to set C225 to default settings i.e. restore zone count, names and types to factory settings.

General enhancements

  1. Support ‘sprinklers stop watering’ as a trigger option in recipes

  2. Allow a user to order the available systems in the header of the home page.

  3. Support solar diversion configuration settings and control

Bug fixes

  • Fix set Wi-Fi in hotspot mode.

  • Fix Centurion garage door token can’t be copied in Android app.

  • Other bug and typo fixes

iZone Home 3.0.15 - Jul 2024

General enhancements

  • Change colour of icons in header of home screen to represent AC modes.

  • Change the icon of a zone tile.

  • Display ‘No Comms’ if an AC unit is not connected.

  • Add pair wireless extender

  • Changed device pinned sync roles.

  • Add geofencing into Recipe

  • Add more days options for system lockout

  • Improve local communication

Nova controller enhancements

  • Display time in home page and sync time to smart hub (COCBH)

  • Support batch pair temperature sensor in setup wizard.

  • Support pair iZone Hub to CPU (need COCBH and CPU updated)

  • Support set system RF selection (need COCBH and CPU updated)

  • Support go back to setup wizard from iZone Hub -> Settings

Bug fixes

  • Fix app stuck issues at iZone Logo caused by old app file system lockup.

  • Fix text size for some font size zoomed Android devices.

  • Fix setup wizard no zone job pin device cause crash.

  • Fix rapid setup zone type bug.

  • Other bug and typo fixes

iZone Home 3.0.14 - May 2024

General enhancements

  • Change setpoint slider colour to gradient blue when in Cool mode and to gradient red when in Heat mode

  • Support Hot Water subsystem.

  • Support All On/Off setting for light switch (CRFL)

Nova controller enhancements

  • Adjust header height to match Nova wall controller.

  • Support power monitoring in demo mode.

  • Remove hot water mock up button in demo mode

Bug fixes

  • Fix screen link system LED checkbox not auto scrolling in Android device.

  • Fix layout size for some small screen Android devices.

  • Make UDP scan refresh every time when link a new system.

  • Other bug and typo fixes