Release notes - CPUs

Release notes - CPUs

Part

Rev

Release date

Changes

Firmware

Part

Rev

Release date

Changes

Firmware

C225

A

4-Sep-2024

First release

B

12-Jan-2025

New MCU

C

12-Jan-2025

New MCU

D

4-Sep-2025

Support OTA updates

C150

A

7-Jan-2025

Initial release

C155

A

24-Feb-2025

Initial release

8-zone CPU module (C225)

C225 3.73 - Sep 2025

  • Overheat protection (default off)

    • Automatically opens or closes zones when temperatures go outside safe limits.

  • Brivis Integration

    • Seamless integration with Brivis gas ducted heater using C325BV module.

  • Favourite Driven Set Point & Power Control

    • Store both set point and ON/OFF state in favourites.

    • Auto ON when activating any climate/open zone favourite; Auto OFF with a close all favourites.

  • Unit auto ON/OFF on Zone Change

    • New toggle to automatically turn on AC when zones switch from CLIMATE or OPEN.

  • VRF Mitsubishi Electric (ME) support

    • Integrate with ME VRF systems using a VRF host module (CVRFH) module.

  • Remote Firmware Upgrade

    • Implement the ability to upgrade firmware versions remotely without replacing physical hardware (C225 and COCBH only).

  • Bug Fixes & Refinements

    • Added configurable timer delay before zones revert to schedules after a Brivis event.

    • Expanded sensor source options (return air, master, or RF sensor).

 

C225 3.70 - May 2025

Applies VRF default settings during updates performed via PK5/PK4

C225 3.69 - Dec 2024

  • Added Mitsi Electric 4th fan speed

  • Fixed iZone/Midea/York AC comms status in Nova controller

  • Added support for Hisense

  • Introduced temperature control for the constant zone

  • Added VRF (Variable Refrigerant Flow) functionality

C225 3.66 - Jul 2024

  • Fix schedule over midnight

  • Fix return air reading in Nova when no temperature control is present

  • Change time to ‘auto turn off AC system’ from 60s to 3s

  • Fix Brivis 6-fan speed in auto mode

  • Add ‘add-on cooler’ option to the Brivis system

  • Added sleep timer count down

C225 3.65 - Jun 2024

  • Hot water system release (IRD-189)

  • Brivis system release (IRD-385)

  • Forward system reset message before resetting itself

  • Send zone 11 setpoint to COCB

  • Change structure of AC unit control firmware for the future VRF system

C225 3.64 - Mar 2024

  • Hot water system initial update

  • Add humidity to zones

  • Send damper positions to COCBH

  • Only slow down dampers when bypass is used

  • Added Haier AC unit control

C225 3.63 - Jul 2023

  • Fix AC unit connection bug (CTZ type boards)

  • Added Gree AC unit

  • Added Haier and MHI to slow damper strategy

C225 3.59 - Jan 2023

  • Fixed advanced constant control with fan auto disabled

6-zone CPU module (C150)

C150 3.69 - Dec 2024

  • Added Mitsi Electric 4th fan speed

  • Fixed iZone/Midea/York AC comms status in Nova controller

  • Fixed climate control mode issue

  • Added support for Hisense

  • Enabled temperature control for the constant zone

  • Fixed sensor status monitor to display signal strength for "RF Sensor"

  • Added support for the new Gree unit (G3)

  • Resolved an issue where the constant zone was not selecting the AC unit for temperature control

  • Updated sleep timer functionality to reset the remaining time to 0 when the sleep timer is stopped

C150 3.65 - Jun 2024

  • Hot water system release (IRD-189)

  • Brivis system release (IRD-385)

  • Forward system reset message before resetting itself

  • Send zone 11 setpoint to COCB

  • Change structure of AC unit control firmware for the future VRF system

6-zone CPU module + NET (C155)

C155 3.69 - Dec 2024

  • Added Mitsi Electric 4th fan speed

  • Fixed iZone/Midea/York AC comms status in Nova controller

  • Added support for Hisense

  • Enabled temperature control for the constant zone

  • Introduced VRF (Variable Refrigerant Flow) functionality

  • Fixed the sensor status monitor to display signal strength for "RF Sensor"

  • Added support for the new Gree unit (G3)

  • Resolved an issue with temperature control in the constant zone, where the AC unit selection was not working

  • Updated the sleep timer to reset the remaining time to 0 when stopped

C155 3.65 - Jun 2024

  • Hot water system release (IRD-189)

  • Brivis system release (IRD-385)

  • Forward system reset message before resetting itself

  • Send zone 11 setpoint to COCB

  • Change structure of AC unit control firmware for the future VRF system