C535: Nova
- muhammad hamza
- Alex Murphy
Page Content
Please ensure that your Nova's version is up to date. Follow these steps: Go to Nova Settings >Tap on iZone > Tap on the "Nova Controller" option >Tap on "Check for Updates."
Nova Manual
Scan the QR code below to access the online installation wizard for the C535 Series. Please provide the information below.
Please select the Brand of Air con you are installing.
Is the iZone home mobile app required (please select Yes).
Please chooses the Type of constant/bypass zone.
Please select the Number of Zones that are using temperature sensors.
Please select the Number of Zones that are just open/close
Then click submit for a wiring diagram of the system and a step by step guide on how to install the iZone.
The online installation wizard will cover all of the below installation steps:
Design Diagram
Before You Start
Wiring
Configure System
Pair Temperature Sensors (if required)
Commissioning the System
Installing the Wi-Fi Smart Hub
Please go through the link given below . It is the quick informative training course for installer. It will cover
Introduction to 535 kit.
Installation of Nova.
Setting up new nova.
Wiring diagram for Nova
Pair Temperature Sensors (if required)
Commissioning the System
Installing the Wi-Fi Smart Hub hotspot.
Nova / Nova Mini climate control kit includes:
Part number | Name | Description |
C225 | CPU module | Central processing unit that controls main business logic of the system. |
CT24ACE | CPU module power supply | Power supply for the CPU |
C325# | AC unit module | Manages communication between CPU and the AC unit. The # will be replaced with an acronym for the AC unit brand e.g. C325D2 for Daikin and C325P2 for Panasonic etc. |
COCBH | Smart Hub | Manages communication between the CPU and Nova wall controller as well as the communication between the iZone Home mobile app and the CPU. |
CRFSW | Wireless temperature senser | Temperature sensor for a zone. iZone also offers a wired option. |
CRFS2 | Compact temperature sensor | Temperature sensor for a zone. Same as the CRFSW but smaller. No button to open/close a zone. |
CCASSW | Nova Mini wall controller | 7″ touch screen |
CCASLW | Nova wall controller | 10″ touch screen |
CTDC12 | Nova power supply | Power supply for the touch screen. iZone also provides a 35m cable (15m DC cable) as an alternative option. |
CDTS | Induct temperature sensor | Is only required on systems that have iZone zone temperature sensors for the control of zones. |
First, connect the Central Processing Unit (CPU) to the power supply. Then, connect the zone motors to the CPU C225. Attach the C325 AC unit module to the Central Processing Unit. Next, wire the AC unit control cable to the FCU or indoor unit. For the wiring diagram, please refer to the link provided below.
Please unbox the nova controller and connect both the Nova and the iZone Hub to the power supply. iZone hub/ bridge is already paired up with the Nova
Please make sure the nova is connected to the iZone hub network. Please make sure that Nova has that wifi symbol on right top corner
Open the iZone app on the Nova device. Then, tap on the "Setup" option located in the top section
Please enter the installer code to set up your system
Please select the brand of your Aircon and press continue. As show in picture given below
In next step, please configure your Air con as shown in figure given below
In the next step, configure each zone one by one. First, enter the name of the zone. Then, choose the type of zone. If the zone has a wireless temperature sensor, please select "Zone Temperature Sensor" for that zone
Once you have configured each zone, the system will display a summary of your configured setup. If all the information is correct, please tap on "Confirm"
Lastly it will upload all the settings to the CPU and if you have temperature sensors the next step is to pair the sensors
Now you system is all set up and ready to use
To Pair the Temp sensors with the system, please tap on menu in iZone app
Then tap on devices
On top right corner, click the “+” button
Tap on sensors, then tap on temp sensor
Please select the type of sensor
Please select the target zone
Press and hold the pair button on sensor then press the pair icon in the app