Zones are not opening on climate mode

Owned by muhammad hamza
Last updated: 18 Sept 2023
2 min read

If your Air con works fine on open and close but wont starts on climate mode

Missing Induct sensor

  • Possible reason of this fault is induct temperature sensor is missing.

  • Please check on Zone summary Is there any Induct Temperature.

  • If there is not any induct temperature please follow the steps given below

Settings> Configuration>Password(wamfud)> Options> Hide Induct Temperature (If it is selected

Please deselect it).

 

  • If still there is not any induct temperature on control panel then Induct temperature sensor is not installed(contact Installer for further help)

Installation of Induct Temperature sensor

  • On the roof top make a hole in a supply duct box / supply duct install it there .

  • Make sure that sensor do not touch walls of the duct.

Controlling sensor

  • If you are using your system on climate control mode please make sure that controlling sensor will be on Zones.

  • TO select controlling sensors Please follow these steps.

Settings>Configuration> password (wamfud)>Ac unit> controlling sensor (select Zones)