User Guide - CR
PAGE CONTENTS
HOW TO SEPERATE THE POWER SUPPLY
Sometimes it is preferable to have the repeater on a desk next to the router and the power supply plugged into a GPO or power board under the desk. To facilitate this requirement the iZone repeater can be broken down to a power supply and repeater with an interconnecting power lead
The power pack and repeater can be separated as follows:
Using a Philips screw driver, remove the two screws at the base
Separate the two halves
Remove the power adaptor and keep the base safe in case you want it again later
Repeater
Power Adaptor
Lead 1.5m Long