User Guide - CR

Owned by Alex Murphy
Last updated: 24 Aug 2022
1 min read

PAGE CONTENTS

 

HOW TO SEPERATE THE POWER SUPPLY

Sometimes it is preferable to have the repeater on a desk next to the router and the power supply plugged into a GPO or power board under the desk. To facilitate this requirement the iZone repeater can be broken down to a power supply and repeater with an interconnecting power lead

 

The power pack and repeater can be separated as follows:

  1. Using a Philips screw driver, remove the two screws at the base

  2. Separate the two halves

  3. Remove the power adaptor and keep the base safe in case you want it again later

Repeater

Power Adaptor

Lead 1.5m Long