CGPO: Smart Plug - Install Guide

Open

Smart plug: Smart plugs can be used for remote control of 240V devices powered from a standard AU general purpose outlet

Australian plug: AU Plug

Pair button: The pair button is located on the side of the iZone smart plug. Press and hold the pair button while pressing the pair button on the App or on the iZone screen. The LED will flash red rapidly to indicate it is paring to the system

Manual On/Off button: The smart plug can be controlled manually from the on off button. When on the LED behind the button will be blue and when off it will be red

Remove the smart plug from the packaging

Plug the smart plug into the wall outlet (One at at time)

Switch the power at the wall outlet on

The on/off switch will flash red if it has never been paired

Pair the iZone smart plug to the iZone Bridge by pressing the pair button on the smart plug and on the screen simultaneously

The on/off button will flash blue several times to indicate it is pairing

Name your smart plug on the screen or app

Group your smart plug to other devices or switches

Plug the appliance to be controlled into the iZone smart plug

Control your appliance via the touch screen , smart phone or tablet , or iZone wireless switch or the on / off button on the iZone smart plug

Schedules, scenes, voice control, all ON / OFF , iSense control, alarm and holiday features can all be set up to control this smart plug